588270
23
Zoom out
Zoom in
Previous page
1/24
Next page
23
Large amounts of rich ingredients like nuts, butter, Measure ingredients accurately. Never exceed the
dried fruits, syrups and grains will make dough heavy. stated amounts in the recipe
This will slow down the rising and prevent the bread
from baking through
Bread over browned
Too much sugar Measure ingredients accurately
Crust colour set too high Set crust colour to light
Bread has large holes in texture
Water was too hot and killed the yeast Use liquids at temperatures between 21°C and 27°C
Too much liquid Measure ingredients accurately
Too much yeast Measure ingredients accurately
High humidity and hot ambient temperatures Bake during the coolest part of the day. Try reducing
and increase yeast activity the yeast by 1/4 teaspoon or use liquids direct from the
refrigerator. Do not use the Timer function
Water was too hot and killed the yeast Use liquids at temperatures between 21°C and 28°C
Bread surface is sticky
Bread was left in the machine too long and Whenever possible, remove bread from the baking pan
condensation collected on the baking pan and cool on a wire rack
The wet/dry balance of the ingredients may Measure ingredients accurately
be incorrect
H:HH message on LED and beep
Breadmaker is being used in a very cold or a The breadmaker is programmed to only operate
very hot room between 10°C and 50°C room temperatures. Beyond
these temperatures yeast will not be activated correctly
and therefore the breadmaker would not bake an
acceptable loaf
Temperature in breadmaker is too high from Remove the bread pan and wait until the breadmaker
previous use has cooled down, leave the lid open
Difficult to remove the bread from the pan
The bread is sticking to the pan If it is found that the bread is sticking and is difficult to
remove from the pan, it is recommended that the
surface of the pan is oiled before every use.
Wash the pan in hot soapy water and thoroughly dry,
using a piece of scrunched paper kitchen roll, liberally
coat the inner surface of the non stick pan with oil,
butter or margarine of your choice. Follow the guide
on page 8, ‘how to use your breadmaker’. When the
bread pan is removed from the machine after the
baking programme allow the bread to cool in the pan
for 15 minutes before turning out onto a rack to cool.
Only slice the bread when fully cooled after 20-40
minutes
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morphy Richards 48261 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morphy Richards 48261 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info