6
When making espresso coffee it is important to
use the correct type of coffee grinds. Espresso
coffee is a very fine grind which is designed to
work with espresso filters. Using other types of
coffee in an espresso filter (such as filter coffee
grinds,) will result in a poorer tasting coffee and
could clog the filter.
The coffee maker is compatible with both E.S.E.
pods (a compact coffee pod with a paper filter
covering,) as well as ground espresso coffee.
When making espresso with an E.S.E. pod, use
the One Cup/ E.S.E Pod Filter
(12).
1
Disconnect the appliance from the mains supply.
2
Make sure the appliance has completely cooled
down.
3
Simply wipe the Steam Wand (3) and exterior with
a clean, damp cloth.
Do not use any abrasives or metal scourers as this
will damage the finish on the unit.
4
The Filter Holder (14) and Water Tank (5) should be
washed after each use by rinsing them under
water. To assist in keeping the Filter Holder clean
we recommend you periodically run the machine
with the Filter Holder in place, without coffee,
using water only.
Should the holes in the filter become blocked with
coffee grinds, use a fine bristled brush to help
clean.
When your coffee maker is not being used, we
recommend that you do not leave the filter holder
attached to the machine as this will reduce the life
of the gasket.
5
Remove the Drip Tray Grid and Drip Tray (10) from
the appliance and remove any spilt coffee and
water then clean them with a damp cloth or a
damp sponge.
6
You must clean the Steam Wand and cover
immediately after each use, after it has cooled
down. Briefly use the steam setting to clear any
remaining milk out of the Wand and Cover.
Remove the Steam Wand Cover, place under
warm running water to remove excess milk. If the
Steam Wand becomes blocked, use a small pin to
clean more thoroughly.
WARNING: Steam from the Steam Wand is
extremely hot and can scald.
IMPORTANT: Never wash your coffee machine
accessories in a dishwasher.
1
Disconnect the appliance from the mains supply.
2
Make sure the appliance has cooled down
completely.
3
Remove the Water Tank (5) and Drip Tray (10) from
the machine.
4
Fill the Water Tank with dissolved citric acid
solution, up to the max level marked on the side
of the tank.
5
Re-fit the Water Tank and Drip Tray to the machine.
6
Place an empty container under the Brewing
Head (4) to gather the descaled hot boiled water.
7
Connect the appliance to the mains supply.
8
Slide the On/Off Switch (9) and wait for the
Temperature Indicator Light (6) to turn off.
9
Turn the Control Knob (2) to the coffee position.
Water will flow through the unit.
10
Turn the Control Knob back to the off position.
11
Repeat the process with cold water only to flush
the system.
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from.
Please have the product name, model number
and serial number to hand when you call to help
us deal with your enquiry quicker.
UK Helpline: 0844 871 0960
IRE Helpline: 1800 409 119
Spares: 0844 873 0726
Talk To Us
If you have any questions or comments, or want
some great tips or recipe ideas to help you get the
most out of your products, join us online:
Blog: www.homeofthehouseproud.com
Facebook: www.facebook.com/morphyrichardsuk
Twitter: www.twitter.com/loveyourmorphy
Website: www.morphyrichards.com
Contact us
Descaling
Care and cleaning
E.S.E. Pods
Using the correct type of
coffee grinds
