465515
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
For details of other Morphy Richards products, please see our website:
R
30. Return the appliance to the normal upright
position and reinstall the drip tray and water
tank to the appliance.
Note:
All other functions will not perform until the
De-scaling operation is completed.
Cleaning and maintenance
1. Disconnect the appliance from the mains supply.
2. Make sure the appliance has completely cooled
down.
3. Simply wipe the Steam Nozzle , Warming
Plate ¤ and exterior with a clean, damp cloth.
Do not use any abrasives or metal scourers as
this will damage the finish on the unit.
4. The Filter Holder and Water Tank should
be washed after each use by rinsing them under
water. To assist in keeping the Filter Holder clean
we recommend you periodically run the machine
with the Filter Holder in place, without coffee,
using water only.
Should the holes in the filter become blocked
with coffee granules, use a fine bristled brush to
help clean.
When your coffee maker is not being used, we
recommend that you do not leave the filter
holder attached to the machine as this will
reduce the life of the gasket.
5. Remove the Drip Tray Grid and Drip Tray ·
from the appliance and remove any spilt coffee
and water then clean them by a damp cloth or a
damp sponge.
6. You must clean the Steam Nozzle
attachment immediately after each use, after it
has cooled down. Briefly use the steam setting
to clear any remaining milk out of the Nozzle (as
depicted on page 7.) Remove the Steam Nozzle
by unscrewing for cleaning. Place the Nozzle
under warm running water to remove excess
milk. If the Steam Nozzle becomes blocked, use
a small pin to clean more thoroughly.
WARNING: Steam from the nozzle is
extremely hot and can scald.
IMPORTANT: Never wash your coffee machine
accessories in a dishwasher.
HELPLINE
If you have any difficulty with your appliance, do
not hesitate to call. We are more likely to be able
to help than the store from where you bought it.
Please have the following information ready to
enable our staff to deal with your enquiry
quickly:
Name of the product.
Model number as shown on the underside of
the appliance.
Serial number as shown on underside of the
appliance.
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
Website
You may also contact us through our website, or
visit the site to browse and purchase
appliances, spare parts and accessories from
the extensive Morphy Richards range.
47020 rev4_x 28/09/2010 11:41 Page 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morphy Richards 47020 Mattino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morphy Richards 47020 Mattino in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info