Vertical steam
Hold the iron in a vertical position
between 1cm and 2cm away from the item
D. Press the shot of steam button ¤, this
will create vertical steam. This feature is
especially useful for removing creases from
hanging clothes, curtains, wall hangings, etc.
Note; For optimum steam quality, do not
operate the shot more than three times in
succession.
No drip system
Your iron is fitted with a no drip system
which is designed to prevent water escaping
from the soleplate when the iron is too cold.
During use, the no drip system may emit
a loud click, particularly during heat-up or
whilst cooling down. This is perfectly normal
and indicates that the system is functioning
correctly.
Auto shut-off
(certain models only)
If your iron is fitted with the auto shut-off
function it will automatically shut down after
a set period.
If the iron is left unattended in the
horizontal position it will shut down after 1
minute.
If it is left in the vertical position it will
shut down after 8 minutes.
The auto-shut off light  will flash
indicating the product is in shut down mode.
To reactivate the iron gently shake it, the
temperature indicator light will come on
indicating the iron is warming up and wait for
the iron to heat-up as normal.
Life long anti-scale
system
(certain models only)
The life long anti-scale system reduces
scale deposits and helps prolong the life of
the iron.
Emptying and storing
When you have
finished ironing,
unplug your iron.
Ensure that the
variable steam control
is set at the ‘0’
position, lift up the fill
cap and empty any
remaining water out of
the filling hole.
Do not store in the box, but in an upright
position, so that any drops of water
remaining cannot leak out
and discolour the soleplate.
Important: The flex can
be damaged if wound too
tightly around the iron after
use. Make a loose loop with
the flex and wrap it around
the iron. The iron must be
cool before winding the flex
and storing on its heel.
6
D
