5
Before using your Hand Mixer for the first time,
wash the Beaters (4) and Dough Hooks (5) in
warm soapy water, rinse and dry.
Before assembling the Hand Mixer, be sure the
power cord is unplugged from the wall power
socket and the Speed Selector (2) is at the 0
position, then plug in the power socket.
The max operating time should not exceed 5
minutes. A minimum of 20 minutes rest time to
cool down must be maintained before the
Hand Mixer is used again.
Your Hand Mixer is supplied with two Beaters (4).
The Beaters (4) may be fitted in either Hand Mixer
socket, as they are identical.
Your Hand Mixer is supplied with two Dough
Hooks (5). One of your Dough Hooks (5) will have
a washer on the shaft. Insert this into the larger
hole on your mixer.
1.Plug the Hand Mixer into the wall power socket,
ensuring the Speed Selector (2) is at 0.
2. There are 5 speed settings. Turn the Speed
Selector (2) to your desired setting and the
appliance will start working.
To run the Hand Mixer at high speed for
intermittent bursts, press the Turbo Button (3).
1. When mixing is completed, turn the Speed
Selector (2) to the 0 position, unplug the Hand
Mixer from the wall power socket.
2. If necessary, scrape any excess mixture from the
Beaters (4) or Dough Hooks (5) with a rubber or
wooden spatula.
3. To remove the Beaters (4) or Dough Hooks (5)
simply press the Ejector Button (1), ensuring the
Speed Selector (2) is set to 0.
WARNING: Ensure there are no utensils in the
bowl before mixing
Before First Use
Inserting The Beaters
Inserting The Dough Hooks
Important
Using your Hand Mixer
Turbo Mode
After Use
