6
Remove any protective cover from the soleplate (5) and the base unit (18), if any.
Unwind and straighten the power and steam supply cords.
Textiles and clothes carry ironing instructions. If not, follow the temperature guide above, but test the
temperature by ironing the hem of the garment or other discreet area first.
You can carry the appliance by the iron handle (1) once the iron is locked to the base unit (18) (see
‘Storing the steam iron’ on page 11).
Locate the steam generator horizontally on the iron rest plate of your ironing board (if large enough) or on
a heat resistant stand at the same height as your ironing board or below it. Always ensure the steam
generator is on a firm surface when ironing.
WARNING: Do not use the product on a surface which could be damaged by heat or steam such as
a worktop or a polished wood surface.
If in doubt, contact Morphy Richards.
Before first use
Location
Using the Steam Generator for steam ironing
Plug the appliance into a mains outlet, you will
hear a beep. Press the On/Off button (31), it will
beep again and the power indicator light (26)
will illuminate and the Eco steam indicator light
(27) will flash.
1) Removing and filling the water tank
When steam ironing, remove the detachable
water tank (11), lift the filling cap (8), and fill with
water to the max fill line. Replace the water tank.
IN HARD WATER AREAS, WE RECOMMEND A
MIX OF 50% TAP WATER AND 50% DISTILLED,
DEIONISED OR DEMINERALISED WATER.
Never use battery topping up fluid or water
containing any substances like starch, sugar,
fragrant additives or defrosted water from a
refrigerator.
NOTE: Please see point 2 of ‘Exclusions’ on page 12.
Re-filling during use
If the water level is too low, the low water indicator
will illuminate and the unit will not produce steam.
If this happens, refill the detachable water tank
(11) with water.
2) Switching on
