793879
5
Zoom out
Zoom in
Previous page
1/6
Next page
5
WARNING: Crumbs will accumulate in the
Crumb Tray (7) and could catch fire if not
emptied regularly.
1. When the appliance has cooled down completely,
tap the sides of the case lightly to dislodge any
crumbs lodged in the Bread Slots (1).
2. Empty the Crumb Tray and replace.
Never operate the appliance without the
Crumb Tray fitted.
Removing the Crumb Tray
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from.
Please have the product name, model number
and serial number to hand when you call to help
us deal with your enquiry quicker.
UK Helpline: 0344 871 0944
IRE Helpline: 1800 409 119
Spares: 0344 873 0710
Talk To Us
If you have any questions or comments, or want
some great tips or recipe ideas to help you get
the most out of your products, join us online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
Twitter: @loveyourmorphy
Website: www.morphyrichards.com
Contact us
Before cleaning, unplug your toaster and let it
cool down.
The external part of the appliance must be
cleaned with a soft cloth. Do not use abrasive
detergents that can ruin the surface.
DO NOT IMMERSE IN WATER.
After each use, remove the plug from the
electrical outlet and empty the crumb collection
tray that is under the appliance.
DO NOT TOUCH ANY PART OF THE TOASTER
WITH SHARP OR METAL UTENSILS,
ESPECIALLY INSIDE THE BREAD TOASTING
SLOTS. RISK OF ELECTRIC SHOCK AND
DAMAGE TO THE TOASTER.
Care and cleaning
In order to achieve uniform browning, we
recommend you wait a minimum of 30 seconds
between each toasting, so that the control can be
automatically reset.
If toasting one slice only, you may need to
adjust the Browning Control (3) to a slightly
lower setting. You will notice a variation in
toast colour on one side of a single slice. The
side facing the inner wall of the Bread Slot (1)
will be darker in colour than the side facing
the outer wall of the bread slot.
When toasting two slices it is recommended they
are of equal size and freshness.
Stale bread toasts more rapidly than fresh bread.
Therefore, the Browning Control should be set at
a lower setting than usual.
All sorts of bread can be used as well as
teacakes, small rolls etc. Slices should not
however be so thick as to cause burning or
jamming within the Bread Slots (1).
If the bread in your toaster becomes jammed,
disconnect your toaster at the socket, allow it to
cool, then remove the bread.
Hints and tips
Allow the toaster to cool fully before putting away.
Should some toast remain blocked in the toaster,
remove the plug from the mains, wait for the
toaster to cool down until it is safe to touch, then
turn the toaster over and shake it gently.
TT220031 MUK Rev2.qxp_IB 26/01/2021 Page 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morphy Richards 220031 - Hive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morphy Richards 220031 - Hive in the language / languages: English as an attachment in your email.

The manual is 0.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info