653302
26
Zoom out
Zoom in
Previous page
1/36
Next page
26
SECTION 7 - ROuTINE SERvICINg INSTRuCTIONS
7.2
BOILER UPPER & LOWER FRONT PANEL REMOVAL / REPLACEMENT
7.3
FAN AND VENTURI ASSEMBLY REMOVAL AND CLEANING
REMOVAL
1. Lift the lower front panel access panel.
2. Unscrewthetwoxingscrews,closetheaccesspanelto
retain the two screws and hinge the lower front panel down
into the service position.
3. Removethetwoupperfrontpanelxingscrews,liftthe
panel and remove.
REPLACEMENT
4. Hook the upper panel onto the top retaining clips.
5. Retaintheupperpanelwiththetwoxingscrews
previously removed ensuring a good seal is made.
6. Swing the lower front panel up and retain with the two
screws.
7. Close the lower front panel access panel.
2&6
1&7
3&5
1. Disconnect the electrical leads from the fan.
2. Remove the clip from the gas control valve
outlet and ease the pipe upwards rotate and
then ease down to remove.
3. Remove the extended nut on the fan
mounting bracket.
4. Lift off fan and venturi assembly.
5. Inspect the injector for blockage or damage.
6. Inspect fan outlet sealing gasket and
replace if necessary.
1
3
5
Injector
2
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morco GB30 Series II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morco GB30 Series II in the language / languages: English as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info