646332
17
Zoom out
Zoom in
Previous page
1/36
Next page
17
section 5 - installation instructions
5.8
DETERMINING THE FLUE LENGTH
 
10mm
Mark cut length =
A or B + 47mm from terminal lip
1. Measurefromtheouterterminalliptoendofouterue.Markthe
required cut length (A or B + 47mm) around the circumference of the
outerueandcutfollowingthemarktoensureitscutsquare.
2. Dress the cut end to make sure all burr’s are removed and the cut
edge is in its original shape.
3. Mark the inner tube 10mm longer than the outer tube around its
circumference and cut following the mark to ensure its cut square.
4. Remove all burrs and place a light chamfer on the outer edge to aid
assembly.
Centre of turret to edge of turret = 100mm
Turret has a ue insertion of 30mm
The white outer ue tube must protrude the wall by 17mm.
From centreline of turret to wall. Rear mount 155mm, side (including clearance) 200mm
NOTES
REAR
Fit
to wall
A
Flue length measured from outer terminal lip
to end of outer ue
A or B + 47mm
SIDE
Fit
to wall
B
Minimum clearance 2.5mm
WALL
WALL
FIGURE 1
REAR FLUE
Cutuelength=distancefromedgeofturrettooutsideof
wall dimension A + 47mm.
Note. Minimum dimension A which can be accommodated is
91mm.
SIDE FLUE
Cutuelength=distancefromedgeofturrettooutsideof
wall dimension B + 47mm.
Note. Minimum dimension B which can be accommodated is
136mm (with minimum clearance of 2.5mm).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morco GB24 SII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morco GB24 SII in the language / languages: English as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morco GB24 SII

Morco GB24 SII User Manual - Dutch - 10 pages

Morco GB24 SII User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info