646339
19
Zoom out
Zoom in
Previous page
1/37
Next page
If the appliance is installed where the temporary hardness of the water is high,
say over 150 ppm (as defined by BS 7593 1993 Table 2), the fitting of an in line
scale inhibitor is required. This must be comply with the requirements of the local
water company.
Devices capable of preventing the flow of expansion water: e.g. non return valves
and/or loose - jumpered stop cocks should not be fitted u
nless separate
arrangements are made for expansion water.
If a non-return valve is fitted in the incoming water supply - e.g. in line with scale
inhibitor then a D.H.W. expansion vessel MUST be obtained and fitted.
4.8 INSTALLATION IN A BATHROOM
The appliance is rated IPX4D
The boiler may be installed in any room or internal space, although particular
attention is drawn to the requirements of t
he current IEE (BS.7671) Wiring
Regulations and, in Scotland, the electrical provisions of the building regulations
applicable in Scotland, with respect to the installation of the boiler in a room or
internal space containing a bath or shower. For IE reference should be made to
the current ETCI rules for electrical installations and I.S. 8 13:2002
If the appliance is to be installed in a room cont
aining a bath or shower then the
appliance can be installed in Zones 1 & 2, as detailed in BS. 7671. Although
consideration must also be given when fitting boilers within bathrooms to adhere
to the current gas safety regulations.
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morco 30CPM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morco 30CPM in the language / languages: English as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info