684858
49
Zoom out
Zoom in
Previous page
1/54
Next page
47
Customer Support
Troubleshooting
Problem Solution
The robot cleaner does not work.
Turn o the power switch on the lower-rear side.
Check the battery. 󰥧 Charge the battery in the charger.
The robot cleaner does not charge.
Remove any obstacles around the charger.
Check if the power cord is connected to the charger.
Turn on the power switch at the rear of the charger.
If you charge the robot cleaner forcedly, it may not be charged.
The remote control does not work. Replace the batteries.
Suction power is weak.
Clear the dust bin.
Clear the lter of the dust bin.
Check if there is any obstacle in the dust inlet.
The power is not turned on.
Turn o the power switch on the lower-rear side.
Check the battery.
The brush does not rotate.
Check if there is any obstacle in the brush.
Check if the brush has been installed properly.
The operational noise is louder than
normal.
Check if the dust lter is installed properly.
Check if there is any obstacle in the brush.
The robot cleaner action is not
working normally during cleaning.
Check if the mop plate is installed properly.
Clean the sensor with a soft cloth.
The Scheduled Cleaning does not work. Press the Select button to conrm the time setting.
The robot cleaner does not respond
if you press the button.
When you are charging the robot cleaner by connecting the power adaptor
directly, the buttons will not be recognized. This is normal.
The operating time is short.
If you do not properly connect the robot cleaner to the charger or the
adaptor for a long time, the battery may be discharged. In this case, the
battery usage time may be short.
Do not disconnect the charger, even if the charge is completed.
If you do not intend to use the robot cleaner for an extended period of time,
turn o the power switch on the lower-rear side.
I can’t control the suction power.
If the mop plate is attached to the robot cleaner, you can’t control the
suction power.
Clean the mop plate installation holes.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Moneual ME770 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Moneual ME770 Series in the language / languages: English as an attachment in your email.

The manual is 38,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info