8
Robot Cleaner
Do not touch the plug or wall socket with wet hands.
Þ
Doing so may cause electric shock.
If you spill water into the robot cleaner, unplug the power cord and allow the unit to dry completely before use.
Þ
Water can bring the risk of re and electrical shock.
Þ
Immediately remove the power cord from the outlet and contact your service center.
Do not use chargers other than the charger that came with your robot cleaner.
Þ
Overvoltage brings the risk of re and electrical shock.
Do not install the charger in a location that is damp or wet, dusty, or near water.
Þ
This may cause a re or an electrical shock and damage to the unit.
Do not touch the terminal of the charger with any metallic object (such as a clip, pin, etc.).
Þ
This creates the risk of re and electrical shock.
If you do not plan to use the robot cleaner for an extended period of time, turn o the power switch at the bottom of
the back.
Þ
The battery may be discharged if you leave it switched on.
Management
To ensure safety, only a qualied service agent should repair or disassemble the product.
Þ
Repair by unqualied personnel may damage the robot cleaner, and brings the risk of re and electrical shock.
Dispose of the battery properly.
Þ
If you throw the battery into re or expose it to direct sunlight, there is the risk of re and explosion.
Þ
Dispose of your old batteries according to the local laws and regulations of your region.
Clean the obstacle and bottom sensors periodically.
Þ
If the sensor becomes covered by lint and dust, the robot cleaner may malfunction.
Please use the specied lter.
Þ
Use of a dierent lter will void your warranty.
