Manual Monacor PA-4000PTT (page 9 of 42) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

632607

Zoom out

Zoom in

1/42

English

6-Channel PA Mixer for 4 Zones

These instructions are intended for experts

(installation) and for users without any technical

knowledge (operation). Please read these

instructions carefully prior to operating the unit

and keep them for later reference. All operating

elements and connections described can be

found on the fold-out page 3.

Contents

1 Control Elements and Connections . . 9

1.1 Front side of the PA-6040MPX . . . . . . . 9

1.2 Rear side of the PA-6040MPX . . . . . . . . 9

1.2.1 Connection module for the zone paging

microphone PA-4000RC . . . . . . . . . . . . 9

1.3 Desktop microphone PA-4000PTT . . . . 9

1.4 Zone paging microphone PA-4000RC . 10

2 Safety Notes . . . . . . . . . . . . . . . . . . . . 10

3 Applications and Accessories . . . . . 10

4 Setup Options . . . . . . . . . . . . . . . . . . 10

5 Connections . . . . . . . . . . . . . . . . . . . . 10

5.1 Microphones . . . . . . . . . . . . . . . . . . . . 10

5.2 Audio sources with line level . . . . . . . . 10

5.3 Direct inputs . . . . . . . . . . . . . . . . . . . . . 11

5.3.1 Setting the priority for the direct inputs 11

5.4 Desktop microphone PA-4000PTT . . . 11

5.5 Zone paging microphone PA-4000RC . 11

5.5.1 Installing the connection module . . . . . 11

5.5.2 Connecting zone paging microphones 11

5.5.3 Setting unit addresses . . . . . . . . . . . . . 11

5.6 Recorder, monitoring system . . . . . . . . 11

5.7 Amplifiers . . . . . . . . . . . . . . . . . . . . . . . 11

5.8 Pushbutton for chime triggering . . . . . . 12

5.8.1 Selecting the chime tone . . . . . . . . . . . 12

5.9 Power supply and

emergency power supply . . . . . . . . . . . 12

6 Operation . . . . . . . . . . . . . . . . . . . . . . 12

6.1 Checking the outputs . . . . . . . . . . . . . . 12

6.2 Triggering the chime . . . . . . . . . . . . . . 12

6.3 Desktop microphone PA-4000PTT . . . 12

6.3.1 Settings at the PA-4000PTT . . . . . . . . 12

6.4 Announcement via the input PAGING . 12

6.5 Zone paging microphone PA-4000RC . 12

6.5.1 Status indications at the PA-4000RC . 13

6.5.2 Settings at the PA-4000RC . . . . . . . . . 13

7 Specifications . . . . . . . . . . . . . . . . . . 13

7.1 Mixer PA-6040MPX . . . . . . . . . . . . . . . 13

7.2 Zone paging microphone PA-4000RC . 13

Block diagram . . . . . . . . . . . . . . . . . . . . . . . . 41

1 Control Elements and

Connections

1.1 Front side of the PA-6040MPX

1 Tone controls BASS and TREBLE, each for

the input channels CH1 to CH6

2 Switches to assign the input to the outputs Z1

to Z4, each for input channels CH1 to CH6

3 Signal level indicators 0/−3/−8/−13 dB for the

outputs Z1 to Z4

CLIP will light up when the output is over-

loaded. In this case, reduce the volume of the

output with the control (9) or reduce the vol-

ume of the inputs with the controls LEVEL

(8).

4 Switches PAGING / PTT Z1 to Z4 to select the

outputs for an announcement via the desktop

microphone PA-4000PTT or via the input

PAGING (26)

5 Rotary switch REC / MONITOR to select a

zone output signal for the outputs REC (19)

and MONITOR (20); position OFF = off

6 Volume control LEVEL for the outputs REC

(19) and MONITOR (20)

7 LED indicators SIG will light up when a signal

is available at the input, each for input chan-

nels CH1 to CH6

8 Volume controls LEVEL, each for input chan-

nels CH1 to CH6

9 Controls LEVEL for the overall volume, each

for zone outputs Z1 to Z4

10 Volume control LEVEL for an announcement

via the desktop microphone PA-4000PTT or

via the input PAGING (26)

11 Power indicator

12 POWER switch

Note: The mixer cannot be switched off when

the voltage of an emergency power supply is

available at the terminals 24 V

 (15).

1.2 Rear side of the PA-6040MPX

13 Mains jack for connection to a socket

(230 V~/ 50 Hz) via the mains cable supplied

14 Support for the mains fuse

Always replace a blown fuse by one of the

same type.

15 Screw terminals for an emergency power

supply (24 V

)

16 Outputs Z1 to Z4 via balanced XLR connec-

tions, for connection to the amplifiers

17 Inputs LOCAL INPUT for signals that are

directly routed to the respective zone output,

as balanced 6.3 mm jacks, each for zones Z1

to Z4

18 RCA jacks, each for input channels CH5 and

CH6; LEFT and RIGHT RCA jacks are pro-

vided for stereo signal sources. The mixer is

monophonic; therefore, the stereo signals are

internally transformed into a mono signal.

19 RCA outputs REC to record an output signal

selected with the selector switch REC/

MONITOR (5); LEFT and RIGHT RCA jacks

are provided for stereo recorders. The mixer

is monophonic; therefore, the signals at the

two jacks are identical.

20 Output MONITOR as 2-pole 6.3 mm jack to

connect a monitoring system for checking the

outputs; the jack will receive the signal

selected with the switch REC / MONITOR (5)

21 Switches PHANTOM, each for input chan-

nels CH1 to CH4; when the switch is

engaged, a voltage of 15 V

 for phantom-

powered microphones will be available at the

XLR contacts of the input jack (22)



Make absolutely sure to observe the

notes in chapter 5.1!

22 Inputs as combined XLR / 6.3 mm jacks, bal-

anced, each for input channels CH1 to CH4



Make absolutely sure to observe the

notes in chapter 5.1!

23 Controls GAIN to match the input sensitivity

to the signal source (microphone level to line

level), each for input channels CH1 to CH4

24 RJ45 jack to connect the desktop micro-

phone PA-4000PTT

25 Plug-in screw terminals (removable) to con-

nect the pushbuttons for chime triggering,

each for input channels CH1 to CH4

26 Plug-in screw terminals PAGING (removable)

to connect a signal source with line level out-

put, as an alternative to the desktop micro-

phone PA-4000PTT, for announcements of

highest priority

1.2.1 Connection module for the zone

paging microphone PA-4000RC

(supplied with PA-4000RC)

27 RJ45 input jacks INPUT 1 and INPUT 2 to

connect up to 32 zone paging microphones

PA-4000RC; when making the connections,

observe the correct line termination

(



chapter 5.5.2)

28 Indicator DATA for the existing connection to

a zone paging microphone PA-4000RC

1.3 Desktop microphone PA-4000PTT

(separately available accessory)

29 Microphone cartridge with windshield

30 LED indicator, will light up when the talk but-

ton (31) is pressed

31 Button TALK; to make an announcement,

keep the button pressed and, if applicable,

wait for the chime

32 Jacks for connection to the mixer; for con-

nection to the PA-6040MPX, the RJ45 jack

(left) is required

33 Switch for priority feature and chime

PRIORITY – for usage at the PA-6040MPX,

leave this switch in the upper position,

because the priority of this microphone is

defined in the mixer (when an announcement

is made or the chime sounds, the other input

signals will be muted so that the announce-

ment is easier to understand)

CHIME – in the position ON, a chime will first

sound when the button TALK (31) is pressed

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Monacor PA-4000PTT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Monacor PA-4000PTT Manual

Product: