632632
7
Zoom out
Zoom in
Previous page
1/80
Next page
-6-
2 GETTING STARTED
2.1 GETTING STARTED
Connect all the devices to construct a surveillance system.
1. Install HDD:
The HDD must be installed before the DVR is turned on. Please refer to Appendix #1 for HDD installation instructions.
2. Connect cameras, monitors and external devices. Please refer to the section “1.3 REAR PANEL” for connection, and
Appendix#2 for pin configurations of the external I/O port.
NOTE: Be sure the cameras are connected and power-supplied before the DVR is powered on. Otherwise the
DVR will not be able to detect N/P system automatically.
3. Connect the AC power cord to power adapter and plug into an electrical outlet.
The “ “ or “Power” LED will be on as red.
Press the “ ” or “Power” button. The “ “ or “Power” LED will be on as green.
It takes approximately 10 to 15 seconds to boot the system.
4. Set the date and time on your DVR. Please DO NOT change the date or time on your DVR after the recording function
is activated. The recorded data will be disordered and you will not be able to find the recorded data to backup by time
search.
NOTE: If users change the date or time accidentally when the recording function is activated, it’s
recommended to clear all HDD data, and start recording again.
2.2 SYSTEM TIME SETUP
Go to “MENU” mode, move the cursor to “DATE”, and press “ENTER”. The screen will show the following options.
Please DO NOT change the date or time when the recording function is activated. See “2.1 GETTING STARTED” at P.6
for details.
MENU
DATE
RECORD DATE 2006 – DEC - 01 12 : 15 : 30
TIMER FORMAT Y - M - D
DATE
DAYLIGHT SAVING ON
ADVANCE
DAYLIGHT SAVING
START 4
TH
-SUN-MAR 24:00:00
END 4
TH
-SUN-OCT 24:00:00
ADJUST 01:00
Set the start time and end time, and adjust the daylight saving time in hour. The above example means during the
daylight-saving time period (starting from the 4th Sunday of March and ending on the 4th Sunday of October), the system
time will plus one hour.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMR524 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMR524 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Monacor DMR524

Monacor DMR524 User Manual - English - 60 pages

Monacor DMR524 User Manual - German - 56 pages

Monacor DMR524 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info