632632
26
Zoom out
Zoom in
Previous page
1/60
Next page
MENU FUNCTION
-22-
9) ALARM DURATION (SEC)
Press “ENTER” or “” / “” button to set the duration time of alarm recording in second (5 / 10 / 20 / 40).
10) PRE-ALARM
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the DVR will record 8MB data before any alarm /
motion is triggered.
6.4.5 Remote
In this menu list, you can set up remote devices to work properly.
Move the cursor to “REMOTE”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE
REMOTE
CAMERA
TITLE DEVICE ID PROTOCOL RATE
DETECTION 01 CAMERA 000 NORMAL 02400
DISPLAY 02 PTZ 255 P-D 02400
ALERT 03 CAMERA 000 NORMAL 02400
REMOTE
04 CAMERA 000 NORMAL 02400
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
The submenu items are described below:
1) TITLE
Show the camera title of each channel set in “CAMERA”.
2) DEVICE
Select the device type (CAMERA / PTZ) according to the connected camera for each channel.
3) ID
Set the ID number (0 ~ 255) for a PTZ camera.
After connecting to a PTZ camera correctly, the default ID of the PTZ camera will be shown on the screen.
4) PROTOCOL
Select NORMAL (our protocol) or P-D (PELCO-D) protocol.
5) RATE
Set the baud rate of each channel (2400 / 4800 / 9600 / 19200 / 57600). For the connected cameras, such as PTZ and
speed dome cameras, etc., please make sure their baud rate setting is the same as the setting here.
Note: For detailed PTZ camera connection & setup, please refer to the section “3.2.2 PTZ” at page 8, and
“6.6.5 PTZ Camera Setup and Control” at page 30.
6.4.6 System
In this menu list, you can check or change some system settings.
Move the cursor to “SYSTEM”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE
SYSTEM
CAMERA
SERIAL TYPE RS-485
DETECTION BAUD RATE 02400
DISPLAY HOST ID 001
ALERT IR ON
REMOTE PASSWORD SETUP
SYSTEM
RESET DEFAULT RESET
NETWORK CLEAR HDD EXT 003
BACKUP UPGRADE NO
HDD INFO R.E.T.R. (MIN) 03
EVENT LOG AUTO KEYLOCK NEVER
LANGUAGE ENGLISH
VERSION 1088-10-K2-04-AA-11
VIDEO FORMAT NTSC
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMR524 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMR524 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Monacor DMR524

Monacor DMR524 Quick start guide - English, German - 80 pages

Monacor DMR524 User Manual - German - 56 pages

Monacor DMR524 Quick start guide - French - 80 pages

Monacor DMR524 User Manual - French - 56 pages

Monacor DMR524 Quick start guide - Italian, Portuguese, Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info