632632
12
Zoom out
Zoom in
Previous page
1/60
Next page
BASIC OPERATION
-8-
3. CONNECTIONS AND SETUP
3.1 Install HDD
The HDDs must be installed before the DVR is turned on. For detailed installation instructions, please refer to
section "APPENDIX 1 INSTALL HDD" at page 50.
3.2 Camera Connection
The cameras must be connected and power-supplied before the DVR is turned on. For detailed DVR video input /
output ports, please refer to section “2.2 Rear Panels” at page 6. For detailed external I/O port description, please refer to
section “APPENDIX 2 PIN CONFIGURATION” at page 51. For detailed camera setup, please refer to its own manual.
Note: When using LOOP function, set the impedance switch at your DVR rear panel to HI-IMPEDANCE to
decrease interferences. The default setting is 75.
3.2.1 Normal Camera Connection
1) Connect the camera with indicated power supply.
2) Connect the camera video output to the DVR video input port with a coaxial cable and BNC connector.
For detailed camera title, ID, protocol and baud rate setup, please refer to section “6.4.5 Remote” at page 22.
3.2.2 PTZ Camera Connection
1) Connect the PTZ camera with indicated power supply.
2) Connect the PTZ camera video output to the DVR video input port with a coaxial cable and BNC connector.
3) For using DVR to control the PTZ camera, please connect the RS485-A line (brown) of the PTZ camera to the PIN11 of
the DVR DSUB solder side, and connect RS485-B line (orange) to the PIN10 of the DVR DSUB solder side.
And then solder them together in case of loosening.
Note: For detailed camera ID, protocol and baud rate setup at DVR side, please refer to section “6.4.5
Remote” at page 22. For detailed camera ID, protocol and baud rate setup at remote AP software side,
please refer to section “(1) Device” at page 39 (AP software system configuration). For detailed PTZ
control instructions, please refer to section “6.6.5 PTZ Camera Setup and Control” at page “30”.
3.3 External Device Connections
3.3.1 VGA Converter (Optional)
This optional peripheral (VGA Converter) allows your DVR to have VGA output function. Connect VGA CONNECTER
(A) to the MONITOR VGA CONNECTER (a), and connect VGA CONNECTER (B) to the DVR D/V PORT (b).
Please refer to the following figure as an example.
3.3.2 IR Transmitter
For MODEL 4 & MODEL 5 DVR, IR remote control is supported (Other models are optional). Please connect the IR
receiver line to the IR port on the DVR rear panel. And make sure the IR function is activated in the DVR menu (The
default setting is on). Please refer to the following figure as an example.
D / V
A: Connect to MonitorVideo Input
B: Connect to DVRVideo Output
B
A
MONITOR
VGA
USB
INP UT
DC 1 9V
VD/
1
LOOP
EXT ERNAL I/OIR
INP UT
2
LOOP LOOP LOOP
3
INP UT
4
INP UT
LAN
ACT.
LINK
1
CALLMONITOR
IN OUT
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMR524 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMR524 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Monacor DMR524

Monacor DMR524 Quick start guide - English, German - 80 pages

Monacor DMR524 User Manual - German - 56 pages

Monacor DMR524 Quick start guide - French - 80 pages

Monacor DMR524 User Manual - French - 56 pages

Monacor DMR524 Quick start guide - Italian, Portuguese, Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info