632500
55
Zoom out
Zoom in
Previous page
1/60
Next page
52
PIN 1.
RS232
RS232
-
-
TX
TX
DVR can be controlled remotely by the keyboard of PC,
using RS-232 serial communications signals.
PIN 2.
RS232
RS232
-
-
RX
RX
DVR can be controlled remotely by the keyboard of PC,
using RS-232 serial communications signals.
PIN 3. ~ PIN 5.
ALARM INPUT
ALARM INPUT
To connect wire from ALARM INPUT ( PIN 3 -- 5 ) to GND ( PIN 9 ) connector,
DVR will start recording and buzzer will be on.
When Menu/ Camera/ Alarm is set up to “Low” : When alarm input signal is “ Low ”, the unit starts to
record and buzzer.
When Menu/ Camera/ Alarm is set up to “High” : When alarm input signal is “ High ”, the unit starts to
record and buzzer.
PIN 7.
EXTERNAL ALARM NC
EXTERNAL ALARM NC
Under normal operation COM connect with NC and disconnect from NO. But when alarm is triggered,
COM disconnect with NC, and connect with NO.
Attention: Voltage restrictions is under AV/DC 30V.
PIN 8.
EXTERNAL ALARM NO.
EXTERNAL ALARM NO.
Under normal operation COM disconnect with NO. But when Alarm triggered, COM connect with NO.
Attention: Voltage restrictions is under AV/DC 30V.
PIN 9.
GND
GND
Signal GND.
PIN 10.
RS485
RS485
-
-
B
B
DVR can be controlled remotely by the keyboard of PC,
using RS-485 serial communications signals.
PIN 11.
RS485
RS485
-
-
A
A
DVR can be controlled remotely by the keyboard of PC,
using RS-485 serial communications signals.
PIN 12, 13.
PIN OFF
PIN OFF
PIN 14.
ALARM RESET
ALARM RESET
To connect wire from ALARM RESET ( PIN 14 ) to GND ( PIN 9 ) connector, it can disable ALARM. An
external signal to
ALARM RESET ( PIN 14 ) can be used to reset both ALARM OUTPUT signal and DVR’s internal
buzzer. When alarm has been triggered, signal becomes “Low”, and it will stop all alarm activities.
Under normal operation, signal remains “High”.
PIN 15.
EXTERNAL ALARM COM
EXTERNAL ALARM COM
Under normal operation COM disconnect with NO. But when alarm triggered, COM connect with NO.
Attention: Voltage restrictions is under AV/DC 30V.
PIN 16, 17.
GND
GND
Earth GND
DMR 504
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMR516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMR516 in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info