632504
19
Zoom out
Zoom in
Previous page
1/36
Next page
User Manual
16
5.2.6.1 HDD Management
Recording time you have left on the Hard Drive.
OVERWRITE: If you select “on” the system will automatically overwrite the oldest recordings once the
hard drive is full; if you select “off”, recording will stop once the hard drive is full.
HDD FORMAT: You use this option to format the hard drive, you can not record files to the hard drive
until it has been formatted. Click [Format HDD] button to start formatting. When selecting [Format HDD]
option the system will prompt you – “Format HDD will loss all the data, do you confirm?” ; click “OK”, system
will prompt you“Is formatting…” and “successful format”; and then system will restart automatically.
USB FORMAT: Use this option to format USB devices.
5.2.6.2 Alarm Set
an assigned e-mail account configured under “EMAIL SETUP”.
Check the box labeled “FULL SCREEN” on the right if you would like the channel that has detected
motion to automatically expand to full screen.
HDD LOSS, HDD SPACE, VIDEO LOSS: Check this box if you would like to trigger the alarm when HDD
is operating irregularly, HDD is full while “HDD Overwrite” is disabled, or video signal from the cameras has
been loss.
ALARM TIME: Option for the duration of alarm after an alarm is triggered. If “Motion Detect” recording is
enabled, this option controls the duration of the recording time after the motion has stopped.
Click [Main MenuDevice HDD] to enter [HDD
Management] menu (shown as Picture 5-30)
When you install a HDD, the system will automatically detect
if HDD is formatted or not; If HDD needs to be formatted, HDD
status will be shown as “Not format”, otherwise, the HDD status
will be shown as “Normal” (refer to Picture 5-31)
TOTAL SPACE: Indicates total space available on Hard
Drive.
FREE SPACE: Indicates unused space available on the
Hard Drive.
USEABLE REC TIME: Based on current image
detail/quality and frame rate, system will show you how
Picture 5-30
Picture 5-31
Picture 5-32
BUZZER: Options are ON or OFF. Set this to OFF to disable
the buzzer, or set this option to ON and then set the ALARM TIME
option for how long the duration of the alarm will be. This option
must be enabled if any of the alarm option below will be enabled.
OUTPUT: Set the duration of the trigger time of the external
alarm.
MD ALARM and I/O ALARM: Check the box on the left to
enable the buzzer to go off when motion is detected or when the
external I/O is triggered. Check the second box to the right labeled
“EMAIL” if you would like your DVR to send an e-mail to
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMR1904LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMR1904LCD in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Monacor DMR1904LCD

Monacor DMR1904LCD User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info