583594

Mobius ActionCam Manual

7
Zoom out
Zoom in
Previous page
1/15
Next page
Playback Mode
•
Ensure you have an A/V cable connected between the camera and an external
monitor and a card is inserted.
•
Turn on the camera if it is not already turned on.
•
Press the Mode button until the red LED turns on (Photo Mode).
•
Now press the Mode button once more. The red LED will remain on, but the camera
will be in playback mode and the first frame of the first clip found on the card will
show on the external monitor.
•
► If no clips are found on the card the display will show "Empty".
•
Press the Shutter button to play or pause the clip.
•
Press the Mode button to advance to the next clip.
•
Press the Power button to exit Playback Mode and turn off the camera.
•
► It is not possible to exit Playback Mode except by turning off the camera.
Removable Disk Mode
•
Make sure a memory card is inserted and the camera is turned off.
•
Connect the camera to the PC using a standard USB cable. The green LED may
turn on indicating that the battery is charging.
•
The blue LED will turn on for about a second but will then be replaced by the yellow
LED. After a short while the yellow LED may also turn off.
•
The camera is now in Disk Mode and a new removable drive should be available on
your computer. This may take up to 30 seconds.
•
► You cannot record video or photos if the camera is connected to the PC in
Removable Disk Mode.
•
► It is not possible to enter Removable Disk Mode when using a Video-Out cable
(pins #4 and #5 shorted to ground).
Webcam Mode
There are two ways in which you can enter webcam mode.
Method 1:
•
Connect the camera as a removable drive (see above).
•
Press the Shutter button to enter webcam mode.
•
► If this is the first time you have connected the camera in WebCam mode,
Windows will automatically install the required drivers.
•
► Disconnect the camera or press the Power button to exit webcam mode.
Method 2:
•
Remove the flash memory card.
•
Connect the camera to the PC using a standard USB cable.
•
The yellow LED will blink at 2 second intervals indicating there is no card inserted.
This is normal.
•
► If this is the first time you have connected the camera in WebCam mode,
Windows will automatically install the required drivers.
•
The camera is now in Webcam mode.
•
Start your favorite WebCam software, such as AMCap. If your screen is black, the
software is not configured correctly. Make sure the program shows the "USB PC
camera" as the "device" selected for video capture. If this option does not show in
the "device" option list, restart the webcam program and check again.
•
Disconnect the camera or press the Power button to exit webcam mode.
►Note: Windows XP has an integrated WebCam viewer. Your Mobius should be visible in
Explorer (My Computer) as a "USB Video Device". This functionality does not exist in
Windows 7.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mobius ActionCam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mobius ActionCam in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info