11
5.4 POSITION OF MOBEYE
The built-in motion sensor has a 360º detection pattern and has a range of
about 8 meters. The Mobeye i110 can be positioned both vertically as
horizontally. It can be mounted to the wall, put down on its side in a cabinet,
put down with its sensor upward or downward. If you want to hang the
Mobeye i110, the pre-punched holes can be opened, in order to hang it on
screws.
In order to check the positioning of the sensor, a sensor test can be
executed.
• Enter your 4 digit installation code (factory setting: “1111”)
• Press “menu”
• Press “511”
• Press “OK”
• A confirmation beep is heard. First the green light will be flashing. After
about 30 seconds the light will be on continuously.
In this mode the sensor test can be done; each time the sensor detects a
movement, a repeating beep will sound.
Leave the test by entering OK twice.
