7
4.4 TELEPHONE NUMBERS
The SMS alarm message and voice (‘alarm signal’) message can be sent to
one or two telephone number. At least one telephone number must be
entered in the Mobeye i110. The test messages and low battery messages
are sent to the first programmed telephone number.
4.5 SMS ON/OFF
By default, the Mobeye i110 sends alarm notifications via text message and
calls to the preset contact persons. By turning off the SMS, the unit will only
call after the movement sensor detects an alarm. Regardless of this setting
the temperature alarm always sends an SMS including the actual
temperature.
4.6 CALL ON/OFF
By default, the Mobeye i110 sends alarm notifications via text message and
calls to the preset contact persons. By turning off the CALL, the unit will
only send an SMS text message as alarm notification. It is not possible to
switch off both.
4.7 SENSOR SENSITIVITY
The detectors’ sensitivity can be changed to a high or low value.
1= High
2 = Low
In the high sensitivity mode each detection will generate an alarm. In the
lower sensitivity mode the alarm will be generated only when the detector is
activated twice in any 15 seconds period. This mode prevents false alarms
in case of e.g. draught and is most suitable if the sensor is directed towards
an open space.
4.8 ENTRY DELAY
It is possible to choose from 4 entry delay times. The entry delay is the time
between the moment of detection and the moment of sending the first SMS
text message.
Important note: If the GSM network has low signal strength, the time can be
longer as the network connection may not be established within the time of
the entry delay.
