8
3.2 INSERT THE SIM CARD
Insert the SIM card into the module.
When using the Mobeye SIM card:
The Mobeye SIM card is PIN code secured and will only work in a Mobeye
device. Please do not place it in another device.
When using your own SIM card:
An own SIM card has a “micro” format, is suitable for the 2G network and
can make calls and send text messages. The PIN code is PIN code free.
(A PIN code can be removed by putting the SIM card in to any mobile phone and
entering the 'security' menu.)
Note: make sure that the power supply is removed when inserting or
changing the SIM card. The settings are stored in the device memory.
3.3 INSERT THE BATTERIES
The two batteries (CR123) can be found in the side compartment of the box.
Insert the batteries in the module. Use the +/- indication for the correct
placement. If you replace the batteries the settings will not be deleted, since
they are stored in the device memory.
3.4 CONNECT AND PLACE THE EXTERNAL BATTERY
Connect the supplied external battery to the small
connector. Place the battery in the empty space (wires up
in the corner) and close the casing.
Hint: connect the external battery and close the casing
only after the complete set-up (after programming the
device).
The external battery drains as fast as the 2x CR123. The
battery low warning applies to all batteries at the same
