14
Message texts
The message texts contain the texts that, in addition to the name and
location, are included in the messages. These texts can be adapted to your
own text. Forwarding a notification can be prevented by starting the
message text with $$--.
4.5 HOW TO ACTIVATE THE CML4255
After the previous steps the Mobeye CML4255 is ready for use. It is armed
automatically.
In order to switch off (disarm) the Mobeye CML4255:
- Press the button at the backside for 1 second.
The green LED switches off to indicate the
disarmed status.
In the disarmed status the Mobeye
CML4255 will not send alarm notifications.
The unit remains active and is able to switch
on time-controlled and to send test and 'low
battery voltage' messages.
In order to switch on (arm) the Mobeye CML4255:
- Press the button at the backside for 1 second. The green LED blinks once
every 3 seconds (battery-powered) or stays on continuously (in case of
an external power supply).
If powered externally (with network connection), switching can be done via
SMS commands:
SMS command to switch on: CODE ARM (e.g. 1111 ARM)
SMS command to switch off: CODE DISARM (e.g. 1111 DISARM)
To update the status in the Mobeye Internet Portal: press the button for 5
seconds, or - if the device is externally powered - send a question mark to
the unit (without code).
SMS command status update: ? The status including the
temperature value in the portal
will be refreshed.
