13
Message texts
The message texts contain the texts that, in addition to the name and
location, are included in the messages. These texts can be adapted to your
own text.
4.5 HOW TO ACTIVATE THE PANIC BUTTON
After the previous steps the Mobeye Panic Button is
ready for use. It is armed automatically.
In order to activate the Mobeye Panic Button, press
the button at the backside for at least 1 second. The
green LED switches off to indicate the disarmed
status.
4.6 SYSTEM RESET
To reset the Panic Button two steps are necessary, in following sequence:
1. Delete the Mobeye Panic Button from the Mobeye Internet Portal
Go to "Device Settings" and click on the delete icon in the "Device" block.
Then confirm your choice.
2. Reset the Mobeye Panic Button to its factory settings
1. Remove the batteries and SIM card (and external power supply).
2. Press the outside button while reinserting the batteries. Keep it pressed
for (about) another 5 seconds.
3. Release the button immediately after the LED starts to flash.
After a successful reset, the status LED will blink green to indicate that the
module is not configured. The security code is back to factory settings as
well.
The SIM card is now disconnected and is visible on the "Add device" screen.
The SIM card can be used again in another (or the same) Mobeye device in
combination with the portal.
