18
5.13 AUTOMATIC ARMING / DISARMING
The Mobeye ThermoGuard only works if the unit is armed, which is done via
the on/off button. It is possible to automatically arm and disarm the unit,
based on an arming and/or disarming time scheme. Two schemes can be
entered, which can be assigned to the days in the week (e.g. to have a
different weekend scheme).
As default the automatic (dis) arming times are valid for all days. It is possible
to assign them to only a few days in the week. In this way it is possible to
have two different schemes, which are valid on different days.
As value the weekdays can be entered. Monday is 1, Tuesday is 2, etc. If the
scheme is valid for several days, the days can be set in a row (e.g. 12345
means Monday till Friday).
Example: to arm the system only during weekdays, from 6AM to 7PM, set the
TIMEARM1 to 06:00, TIMEDISARM1 to 19:00 and DAYS1 to 12345.
(Only) when using your own SIM card, the DATE and TIME must also be set
manually. The portal synchronizes this automatically.
5.14 BUTTONLOCK
It can be useful to lock the on/off button to prevent the unit from being
switched off unintentionally. As default the buttonlock is unlocked (so, the
button is enabled). To disable the button, the buttonlock needs to be
switched to "ON". Synchronising the settings to the portal, by pressing for 10
seconds, always works.
5.15 LOW POWER MODE
The low power mode is only important with an externally powered Mobeye
ThermoGuard. If the (factory) mode is set to “OFF”, the communication
module will always have a network connection. When set to “ON” the
behaviour is the same as for a battery-powered device; the communication
module is turned off as much as possible to minimize power consumption.
Note: in low power mode the module cannot be reached via SMS
commands.
