652686
5
Zoom out
Zoom in
Previous page
1/6
Next page
Hints
If the helicopter keeps self-rotating in the air even there is no control signal given, you could correct
it by adjusting the trimmer of gyro on the remote control.
3. After shooting is finished, take out the TF memory card from the videography module
and insert it into the card reader, then, insert the card reader into the USB interface of
the computer to watch the video.
Videography and Photography Function
Pic.1 Pic.2
1. Insert the TF memory card into the videography module of the helicopter and turn on the
helicopter by push the power switch. At this time, the red light and the green light keep flashing
in turn. Two seconds later, the green light keeps “ON” means it is ready.
2. When the helicopter is finished signal connection and is not under shooting condition, the
indicator light of the videography module keeps constant “ON”. At this time,
Turn the switch button on videography module to the direction of the videography icon (Pic. 1),
and then turn on the camera switch of the remote control, it will start taking videography and
the red light of module keeps flashing. Press the camera button again, videography taking
will be stopped.
Turn the switch button on videography module to the direction of the photography icon (Pic. 2),
and then press the camera button on the remote control to take photos.
TIPS
To stop shooting, please press the shooting switch on the remote controller. Directly
unplug the battery cable or take out the TF memory card from the videography module
will result in loss of the video data.
To avoid helicopter crash,please do not insert or take out the TF memory card from the
videography module,when the circuit is on. TF memory card should be installed before
circuit is on and take out after shooting switch is turned off.
When crash occurs,turn off the helicopter and then turn on the power to recover normal
working.
When the red light and the green light of the vediographic device keep flashing
alternately, it means that the TF memory card is not inserted or the TF memory card is
damaged. It is possible to restore the memory card by reformatting(Take out the TF
memory card, then, insert it into the car reader, then, connect it to the computer and
format the memory card)
The red light will keep constant "ON" to indicate insufficient memory.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MJX T641C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MJX T641C in the language / languages: English as an attachment in your email.

The manual is 8,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info