652681
6
Zoom out
Zoom in
Previous page
1/7
Next page
Hints
Circuit protection devices
Videography function
1.If the helicopter keeps self-rotating in the air even there is no control signal given, you could correct
it by adjusting the trimmer of gyro on the remote control.
1.When the battery voltage of the helicopter drops to certain level , the helicopter will be out of
control. Recharge is necessary to resume the function.
2.To protect the helicopter and prevent any risks caused by the stuck of the main rotor, the main
rotor will stop rotating when it is stuck. Pull the upward/downward control stick to the lowest
position to re-launch the helicopter.
2.If the helicopter keeps flying forward/backward in the air even there is no control signal given, you
could correct it by adjusting the trimmer on the remote control.
When the helicopter is finished signal connection and is not under shooting condition, the
indicator light of the videography module keeps constant "on".When press the shooting switch
on the remote controller,it begins shooting and the indicator light turns from constant "on" to
flashing, press the shooting switch again, shooting will stop.
After shooting is finished, take out the TF memory card from the videography module and insert
it into the card reader, then, insert the card reader into the USB interface of the computer to watch
the video.
Installed with camera device, the helicopter has videography function.
TIPS
To stop shooting, please press the shooting switch on the remote controller. Directly unplug the
battery cable or take out the TF memory card from the videography module will result in loss of
the video data.
To avoid helicopter crash,please do not insert or take out the TF memory card from the
videography module,when the circuit is on. TF memory card should be installed before circuit is
on and take out after shooting switch is turned off.
When crash occurs,turn off the helicopter and then turn on the power to recover normal working.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MJX T40C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MJX T40C in the language / languages: English as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info