493634
33
Zoom out
Zoom in
Previous page
1/45
Next page
EN-33
ENGLISH
FUNCTION
(default setting/value)
DESCRIPTION (default setting/value)
Quick Auto Search
(On)
See "Switching input signal" on page 20 for details.
Presentation Timer
(Off)
Reminds the presenter to finish the presentation within a certain time
frame. See "Setting the presentation timer" on page 27 for details.
Language
(English)
Sets the language for the On-Screen Display (OSD) menus. See "Using
the menus" on page 18 for details.
Projector Position
(Front Table)
See "Choosing a location" on page 11 for details.
Auto Power Off
(Disable)
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 36 for details.
Blank Timer
(Disable)
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 28 for details.
Panel Key Lock
(Off)
Disables or enables all panel key functions except Power on the
projector and keys on the remote control. See "Locking control keys"
on page 28 for details.
Timer Controller
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Splash Screen
(MITSUBISHI logo)
Allows you to select which logo screen will display during projector
start-up. Three options are available: MITSUBISHI logo, Black screen,
or Blue screen.
Quick Cooling
(Off)
Selecting On enables the function and the projector cooling time will be
shortened to a few seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its
cooling fans.
High Altitude Mode
(Off)
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 29 for details.
Menu Settings
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last
key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.
Lamp Settings
Lamp mode (Standard)
See "Setting Lamp mode as Low" on page 36 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 39 for details.
Equivalent lamp hour
See "Getting to know the lamp hour" on page 36 for details on how
the total lamp hour is calculated.
3. SOURCE
menu
4. SYSTEM SETUP: Basic menu
I
I
5. SYSTEM SETUP: Advanced menu
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD95U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD95U in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info