549866
40
Zoom out
Zoom in
Previous page
1/79
Next page
EN-40
ITEM SETTING FUNCTION
ASPECT NORMAL Input video signal is displayed at the max height (768 pixels) or max width
(1024 pixels) of the panel while its aspect ratio is maintained.
• WhenSCREENis16:9,theinputvideosignalisdisplayedatthemax
height (576 pixels) or max width (1024 pixels) of the panel.
16:9 Select to expand squeezed (or horizontally compressed) images such as DVD
images to 16:9. Press the ENTER button to make further settings such as
positioning of the displayed image. (See page 29.)
FULL Select to project images in full size (1024 x 768 pixels) irrespective of type of
input signal.
USER Displays the detailed settings. (See page 45.)
USER ENTER The USER menu is displayed for the following adjustments.
CLAMP POSITION 1-255 Use to correct solid white or solid black in the projected image.
CLAMP WIDTH 1-63 Use to correct solid black in the projected image.
VERT. SYNC. AUTO / OFF Use to adjust the image when its motion doesn’t run smoothly. Select AUTO
for normal use.
LPF ON / OFF Use to select whether or not to enable the LPF. (See page 48.)
SHUTTER(U) 0-126 Use to adjust the image when noise appears on the top part of the image.
SHUTTER(L) 0-126 Use to adjust the image when noise appears on the bottom part of the image.
SHUTTER(LS) 0-128 Use to adjust the image when noise appears on the left half of the image.
SHUTTER(RS) 0-128 Use to adjust the image when noise appears on the right half of the image.
• Thoughhorizontalstripsmayappearontheenlargedprojectedimage,suchsymptomisnotamalfunction.
• Whenyouchangethehorizontalorverticalpositiontoalargeextent,noisemayappear.
• Theadjustablerangeoftheverticalpositionvariesdependingonthetypeoftheinputsignal.Thoughtheimagemaystayinthe
same position even when the setting value is changed, such symptom is not a malfunction.
• WhenyouincreasethesettingvalueofOVERSCAN,noisemayappearonthescreen.
• When16:9isselectedbySCREEN,youcannotsetASPECTto16:9.
• ASPECT-USERsettingsupportstheCOMPUTER1,COMPUTER2,DVI,andHDMIterminalsonly.Therefore,youcannotselect
USER for other terminals.
• Seepages47and48forthedetailedsettingprocedure.
Important:
• YoucansettheIMAGEmenuandtheSIGNALmenuonlywhenthesignalissupplied.
Menu operation (continued)
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD8600U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD8600U in the language / languages: English as an attachment in your email.

The manual is 11,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi XD8600U

Mitsubishi XD8600U Additional guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info