493655
13
Zoom out
Zoom in
Previous page
1/75
Next page
EN-13
Setting the projector posture
You can select the posture of the projector. Set
COOLING CONDITION in the INSTALLATION 1 menu
according to the posture.
Important:
Inconsistency between the projector posture and
the menu settings may cause breakdown or failure
of the projector or the lamp.
When you use the projector in the HIGH ALTITUDE
mode, the selectable projector posture is fl oor
installation (0°) and ceiling installation (180°) only.
Setting the projection angle
Set COOLING CONDITION in the INSTALLATION
1 menu referring to the fi gure below. The default
setting is 0°.
Straight up
Straight down
Ceiling installation Floor installation
90
˚ ±
15
˚
90°
270˚ ± 15˚
270°
45
˚ ±
30
˚
45°
135˚ ± 30˚
135°
315˚ ± 30˚
315°
225˚ ± 30˚
225°
0
˚ ±
15
˚
180˚ ± 15˚
180°
Angle range
Projection angle setting
(See page 32 for menu setting.)
1. Display the INSTALLATION 1 menu.
2. Select COOLING CONDITION by pressing the S or
T button.
COOLING CONDITION
3. Press the ENTER button.
COOLING CONDITION
COOLING CONDITION
4. Select the angle by pressing the W or X button.
5. Press the ENTER button.
Important:
If the setting value selected in the menu is
inconsistent with the actual projection angle, the
cooling condition setting dialog appears. In this
case, select the projection angle using the W or X
button and then press the ENTER button.
Setting HIGH ALTITUDE MODE
Set HIGH ALTITUDE MODE in the INSTALLATION
1 menu according to the altitude at which you use
the projector. The default setting is STANDARD.
Select STANDARD when using the projector at an
altitude from 0 to 2000 meters.
Select HIGH ALTITUDE when using the projector at
an altitude from 2000 to 2700 meters.
Important:
If you select STANDARD when using the projector
at an altitude higher than 2000 meters, the
projector may break down or fail.
When you use the projector in the HIGH ALTITUDE
mode, only fl oor installation and ceiling installation
are allowed.
(See page 32 for menu setting.)
1. Display the INSTALLATION 1 menu.
2. Select HIGH ALTITUDE MODE by pressing the S
or T button.
HIGH ALTITUDE MODE
STANDARD
3. Press the ENTER button.
HIGH ALTITUDE MODE
HIGH ALTITUDE MODE
STANDARD
4. Select STANDARD or HIGH ALTITUDE by
pressing the W or X button.
5. Press the ENTER button.
Setting IMAGE REVERSE
Set IMAGE REVERSE in the INSTALLATION 1 menu
according to the orientation of the projector. The
default setting is OFF.
Select OFF for the combination of fl oor installation
and front projection.
Select MIRROR INVERT for the combination of
ceiling installation and front projection.
Select MIRROR for the combination of fl oor
installation and rear projection.
Select INVERT for the combination of ceiling
installation and rear projection.
(See page 32 for menu setting.)
1. Display the INSTALLATION 1 menu.
2. Select IMAGE REVERSE by pressing the S or T
button.
OFF
IMAGE REVERSE
3. Select OFF, MIRROR, INVERT or MIRROR INVERT
by pressing the W or X button.
Setting up your projector (continued)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD8100U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD8100U in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info