493632
35
Zoom out
Zoom in
Previous page
1/44
Next page
EN-35
ENGLISH
Lamp replacement
This projector is equipped with a lamp to project images. This lamp is
a consumable. It may burn out or its brightness may decrease during
use. In such cases, replace the lamp with a new one as soon as possi-
ble. Be sure to replace the lamp with a new lamp separately sold that
is exclusive to this projector. Contact your dealer for purchase of the
lamp.
Caution:
Do not remove the lamp immediately after using the projector. You
may get burned because the lamp is very hot after use.
Before replacing the lamp, press the POWER button to turn off the
lamp and wait for two minutes for lamp to cool down. Unplug the
power cord from wall outlet and wait one hour for the lamp to cool
down completely.
Do not remove the lamp except for replacement. Careless han-
dling can cause injury or fire.
Do not touch the lamp directly. It may break and cause injury or
burn.
Be sure not to drop the lamp lid screw into the projector. Also be
sure not to put metal or any flammable objects inside because it
may cause fire or electric shock. If any objects should fall inside,
unplug and contact your dealer.
Install the lamp securely to prevent failure and fire.
If the lamp should break, small glass fragments may fall out
through the grilles and some may remain inside of the projector or
the lamp box. When taking the lamp box out, be sure to turn over
the projector and hold the handle of the lamp box to avoid injury
due to the glass fragments.
If the lamp should break, never shake the lamp box or hold it in
front of your face after removing it. The glass fragments may fall
out and cause injury to your eyes.
When removing the lamp from the ceiling-mounted projector, use
the lamp replacement attachment packed with the projector or
option lamp to prevent glass fragments from scattering.
Be sure to use the lamp dedicated to this projector, VLT-XD600LP
for XD600U/XD600U-G/WD620U/WD620U-G. Use of other lamps
may cause a failure of the projector.
A) When the projector is placed on the table
Make sure that the projector is securely held in place.
1. Remove the cover (a) of the screw fixing the lamp cover with a
fingernail. If it is difficult to remove it with a fingernail, use a
finetipped tool such as flathead screwdriver.
2. Remove the screw (b) and slide the lamp cover (c) for removal.
3. Loosen the two screws (d) of the lamp unit, and then pull out the
lamp unit (f) by the handle (e).
(Caution)
When replacing the lamp, do not loosen the screws other than
two screws (d). It may cause the failure of projector.
Pull the lamp unit out of the projector slowly. If it is pulled out
quickly, the lamp may break, scattering glass fragments.
Do not spill liquid on the removed lamp unit or do not place it
near any flammable object or where children can reach to pre-
vent injuries or fire.
4. Insert the new lamp unit, and secure it with two screws firmly.
5. Secure the lamp cover with screw (b) back again, and mount the
cover (a).
(Caution)
Make sure that the lamp cover is secured firmly. Otherwise, the
POWER indicator flashes red and green, disallowing the pro-
jector to be powered on.
B) When the projector is mounted to the ceiling
When removing the lamp unit from the projector mounted to the ceil-
ing, never fail to use the Lamp Replacement Attachment to protect
yourself from glass fragments and so on.
Contact your dealer when replacing the lamp unit with the projec-
tor mounted to the ceiling.
1. Remove the lamp cover referring to the procedure 1 and 2 of
"A) When the projector is placed on the table".
(Caution)
When opening the lamp cover to replace the lamp of the ceil-
ing-mounted projector, pay careful attention because glass
fragments may exist inside the lamp cover.
2. Loosen the two screws (d) of the lamp unit.
(Caution)
When replacing the lamp, do not loosen the screws other than
two screws (d). It may cause the failure of projector.
3. Assemble the Lamp Replacement Attachment by folding two
taping portions (g) and two cutout portions (h) along the folding
line as the figure.
Spare lamp for XD600U/XD600U-G/WD620U/WD620U-G:
VLT-XD600LP
(a)
(c)
(b)
(f)
(d)
(e)
(d)
(h)
(h)
(g)
(g)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD600U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD600U in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info