493640
18
Zoom out
Zoom in
Previous page
1/34
Next page
EN-18
Menu operation (continued)
2. INSTALLATION menu
By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected,
and you cannot switch the LAMP MODE in about one minute after the lamp is on.
You cannot select IMAGE CAPTURE SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu is set to SPLASH ID SCREEN,
as the password lock is activated.
When you keep projecting images with BACK COLOR or AV MUTE MODE set to IMAGE for an extended period of time, an afterimage may lin-
ger on the screen.
Menu option Setting Feature description
WALL SCREEN
OFF/BEIGE / LIGHT
BLUE / LIGHT
GREEN / PINK /
BLACK BOARD/WHITE
BOARD
Selects a desired setting based on the color of the screen or wall on
which images are projected. (See page 15.) When selecting a setting
other than BLACK BOARD/WHITE BOARD, you can fine-tune the color
tone to the desired level on the 1 to 5 scale.
LAMP MODE
STANDARD Select this setting when you want to view images in a well-lit room.
LOW
Select this setting when you want to view images at a moderate light
intensity. The operating sound is consequently reduced, and the lamp
lifetime becomes longer.
When this mode is switched, projected images may flicker.
If this mode is frequently switched, the lamp may be deteriorated.
AUTO POWER ON ON/OFF
When this mode is set to ON, the lamp is automatically lit when the
power cord is plugged in the wall outlet. Select ON when you set the
projector at the ceiling.
When the lamp is off, the projector is in standby. Use the remote
control to turn on the lamp.
AUTO POWER OFF OFF/5-60 min
Selects a desired timer setting until the projector enters the standby
mode when there is no signal input from the source.
IMAGE CAPTURE Use this menu to capture the screen for the splash screen.
SPLASH SCREEN ON/OFF
Select ON to display the splash screen when the projector is powered on.
You can edit the splash screen.
BACK COLOR BLUE/BLACK/IMAGE
Selects the background color that is displayed when there is no signal
input from the source. When IMAGE is selected, the splash screen is
displayed.
AV MUTE MODE BLACK/IMAGE
Selects the background that is displayed when the AV MUTE button is
pressed. When IMAGE is selected, the splash screen is displayed.
IMAGE REVERSE
OFF
Select this setting when you want to view images from the front with the
projector set on the floor.
MIRROR
Select this setting when you want to view images from behind the
screen with the projector set on the floor.
INVERT
Select this setting when you want to view images from behind the
screen with the projector set at the ceiling.
MIRROR INVERT
Select this setting when you want to view images from the front with the
projector set at the ceiling.
INSTALLATION
opt.
ON
SPLASH
SCREEN
WALL SCREEN
AUTO POWER
OFF
BACK COLOR
LAMP MODE
OFF
OFF
BEIGE
ON
BLUE
AUTO POWER
ON
STANDARD
OFF
IMAGE
REVERSE
IMAGE
CAPTURE
GO
BLACK
MUTE MODE
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD500U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD500U in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info