215902
27
Zoom out
Zoom in
Previous page
1/36
Next page
EN-27
ENGLISH
Lamp replacement
This projector is equipped with a lamp to project images. This lamp is
a consumable. It may burn out or its brightness may decrease during
use. In such cases, replace the lamp with a new one as soon as possi-
ble. Be sure to replace the lamp with a new lamp separately sold that
is exclusive to this projector. Contact your dealer for purchase of the
lamp.
Replace the spare lamp using the lamp attachment unit that is
equipped with the spare lamp (separately sold) designed specifically
for this projector.
Caution:
Do not remove the lamp immediately after using the projector. You
may get burned because the lamp is very hot after use.
Before replacing the lamp, press the POWER button to turn off the
lamp and wait for two minutes for lamp to cool down. Unplug the
power cord from wall outlet and wait one hour for the lamp to cool
down completely.
Do not remove the lamp except for replacement. Careless han-
dling can cause injury or fire.
Do not touch the lamp directly. It may break and cause injury or
burn.
Be sure not to drop the lamp lid screw into the projector. Also be
sure not to put metal or any flammable objects inside because it
may cause fire or electric shock. If any objects should fall inside,
unplug and contact your dealer.
Install the lamp securely to prevent failure and fire.
If the lamp should break, small glass fragments may fall out
through the grilles and some may remain inside of the projector or
the lamp box. When taking the lamp box out, be sure to turn over
the projector and hold the handle of the lamp box to avoid injury
due to the glass fragments.
If the lamp should break, never shake the lamp box or hold it in
front of your face after removing it. The lass fragments may fall out
and cause injury to your eyes.
Be sure to use the lamp dedicated to this projector, VLT-XD221LP
for XD221U. Use of other lamps may cause a failure of the projec-
tor.
Do not use any other tools for replacing the spare lamp, and be
sure to use the lamp attachment unit that is equipped with the
spare lamp (separately sold) designed specifically for this projec-
tor. Use of other tools may cause a failure of the projector.
Make sure that the projector is securely held in place.
1. Remove the cover (a) of the screw fixing the lamp cover with a fin-
gernail. If it is difficult to remove it with a fingernail, use a fine-
tipped tool such as flathead screwdriver.
2. Remove the screw (b) and slide the lamp cover (c) for removal.
The lamp unit is fixed in position with two retaining claws (d) inside
so the lamp attachment unit (e) designed specifically for this pro-
jector is required to replace the lamp.
Do not pull out the lamp forcibly. The lamp unit may be irretrievably
damaged.
A new lamp unit can be installed without the lamp attachment unit.
3. Loosen the two screws (g) indicated as arrows (
J
) in figure, and
mount the lamp attachment unit (e).
Slide the lamp attachment unit in the direction indicated by a white
arrow after the installation of it, and hook the claw (f) into the hole
of the device to fix the lamp attachment unit.
If not hooking the claw, the lamp attachment unit will be lifted with-
out being fixed in the precise position.
(Caution)
When replacing the lamp, do not remove the screws other than
those in the above picture. If do, it might cause the failure of prod-
uct.
When the projector is mounted to the ceiling:
Secure the lamp attachment unit and the projector with the screw
(h) that come with the lamp attachment unit. Otherwise, the lamp
unit may fall from the inside and cause injuries.
Contact your dealer when replacing the lamp unit with the pro-
jector mounted to the ceiling.
4. Pull up the handle (i), and then pull out the lamp unit (j) by the han-
dle.
Spare lamp for XD221U: VLT-XD221LP
(a)
(c)
(b)
(d)
(f)
(g)
(e)
(h)
(j)
(i)
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi xd221u xga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi xd221u xga in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info