215902
22
Zoom out
Zoom in
Previous page
1/36
Next page
EN-22
Menu operation (continued)
4. SINGAL menu
Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.
When you change the value of the horizontal or vertical position drastically, noise may appear.
The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value
is changed. These conditions are not a malfunction.
SHUTTER does not work correctly during keystone adjustment.
When you increase the value of OVER SCAN, noise may appear on the screen.
Important:
You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.
5. INFORMATION menu
Menu option Setting Feature description
SIGNAL USER menu
HORIZ. POSITION 0-999 Select this setting to adjust the horizontal position of projected images.
VERT. POSITION 0-999 Select this setting to adjust the vertical position of projected images.
FINE SYNC. 0-31
Select this setting to eliminate flickering or blurs, if they appear, when
you are viewing projected images.
TRACKING 0-2800
Select this setting to eliminate vertical wide stripes, if they appear, when
you are viewing projected images.
COMPUTER INPUT
AUTO Automatically sets the appropriate setting.
RGB
Select this setting when you connect the projector to high definition
video equipment having R, G, and B output terminals.
YC
B
C
R
/YP
B
P
R
Select this setting when you connect the projector to a DVD player or
other device having Y, C
B
, and C
R
(or Y, P
B
, and P
R
) component video
output terminals.
OVER SCAN 100%-90% Use this setting to adjust the display area of projected images.
HOLD OFF / ON
Use this setting to adjust projected images when flagging occurs in the
upper area of the screen.
USER OK
CLAMP POSITION 1-255
Use this setting to correct solid white or solid black that appears in pro-
jected images.
CLAMP WIDTH 1-63 Use this setting to correct solid black that appears in projected images.
VERT.SYNC AUTO / OFF
Use this setting to adjust projected images when the motion is not
smooth. Select AUTO for most cases.
LPF ON / OFF Select this setting to enable or disable LPF.
SHUTTER(U) 0-20
Use this setting to adjust projected images when noise appears in the
top part of the image.
SHUTTER(L) 0-20
Use this setting to adjust projected images when noise appears in the
bottom part of the image.
SHUTTER(LS) 0-20
Use this setting to adjust projected images when noise appears in the
left half of the image.
SHUTTER(RS) 0-20
Use this setting to adjust projected images when noise appears in the
right half of the image.
Menu option Feature description
LAMP TIME (LOW)
This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW.
When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than
the actual time. (See page 28 for the interval of lamp replacement.)
When the lamp operating time is 0 to 10 hours, "0H" is displayed. When the lamp operating
time exceeds 10 hours, the actual hours are displayed.
When the lamp operating time reaches 3000 hours, the bar turns yellow. When it reaches
3800 hours, the bar turns red.
(The lamp lifetime is 4000 hours.)
INPUT Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FRE-
QUENCY
Indicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE Indicates the type of the sync signal for the currently projected video signal.
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT.POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
USER
opt.
OK
OFF
HOLD
100%
OVER SCAN
CLAMP
POSITION
USER
1
CLAMP WIDTH 1
LPF OFF
SHUTTER(U) 0
SHUTTER(L) 0
VERT. SYNC AUTO
?
SHUTTER(LS) 0
SHUTTER(RS) 0
SIGNAL
opt.
INFORMATION
opt.
LAMP TIME (LOW)
INPUT
RESOLUTION
VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
SYNC. TYPE 5wire
60.02 KHz
75.04 Hz
1024x768
COMPUTER2
0 H
RG
HV
B
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi xd221u xga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi xd221u xga in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info