33003
9
Zoom out
Zoom in
Previous page
1/100
Next page
8
9
Front Control Panel
SYSTEM RESET
If the TV will not respond to either the remote control
or the front panel controls and/or will not power Off,
press the SYSTEM RESET button with a pointed item
like the end point of a paperclip. The TV will turn Off
and the TIMER light will flash quickly for about one
minute. When the TIMER light stops flashing, you may
turn on the TV again. Changes you made the last time
the TV was On before you used the SYSTEM RESET
button may be lost, however, the changes you made
previously are not lost.
POWER/TIMER Indicator
The green light is a multi-function indicator. This light
will flash rapidly for about one minute each time the TV
is plugged into the wall electrical outlet, when power
is restored after a power failure, or using the SYSTEM
RESET button. Do not attempt to turn on the TV again
during this period. Wait for the flashing to stop and
the light to turn off, before attempting to turn the TV
on. While the TV is powered on, the light illuminates
steadily. If the TV has been programmed to turn on
automatically using the Timer feature, this light will flash
slowly when the TV is powered off.
Except for SYSTEM RESET and TIMER, all of the buttons on the Front Control Panel (highlighted in gray) are
duplicated on the remote control. The top row of labels show the control functions when there are no TV menus
displayed on the screen. The bottom row of labels show the control functions when the TV menus are displayed on
the screen or when a special function has been activated. See Remote Control Overview page 29, for further details
on the functions of these buttons. TIMER is also accessible through the menu screens. Pressing MENU on the front
panel will display the TV menu.
INPUT– 3
POWER
DEVICE
ENTER
ADJUST
ADJUST
CANCELMENU
VOL
CH
FORMAT
SYSTEM
RESET
TIMER
MENU
S-VIDEO VIDEO L – AUDIO – R
Front Panel WS-48515, WS-55515, WS-65515, WS-65515A
DEVICE
CANCELMENUENTER
MENUFORMAT
CH
VOL
POWER
SYSTEM
RESET
TIMER
ADJUST
s
r
v
w
s
r
s
r
ADJUST
Front Panel WS-55615, WS-55615A, WS-65615, WS-65615A, WS-73615
GUIDE
GUIDE
INPUT-3
S-VIDEO VIDEO L-AUDIO-R
IEEE 1394
A/V RESET
There may be times when you wish to reset the A/V
(Audio and Video) settings back to the factory defaults.
To do this for an individual setting, use the Audio
or Video remote control button. To return all of the
settings at once, press GUIDE and FORMAT on the
front panel at the same time, or use the A/V Memory
Reset selection on the AudioVideo menu (page 68).
INPUT 3
This input can be used for convenient connection of
a camcorder or other video device to the TV. If you
connect to the S-VIDEO terminal, the VIDEO terminal
is deactivated. The VIDEO terminal is available when
there is no S-Video connection.
IEEE 1394 (WS-55615, WS-55615A, WS-65615,
WS-65615A, WS-73615 only)
This IEEE 1394 (FireWire®) input/output allows for
temporary connection of IEEE 1394 devices such as
MPEG 2 camcorders or compatible hard disc drives to
the front of the TV. This connection works the same
way as the two rear IEEE 1394 connections.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WS65615 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WS65615 in the language / languages: English as an attachment in your email.

The manual is 7,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info