32997
9
Zoom out
Zoom in
Previous page
1/100
Next page
9
Front Control Panel
SYSTEM RESET
If the TV will not respond to either the remote control or the front panel controls and/or will not power Off, press the
SYSTEM RESET button with a pointed item like the end point of a paperclip. The TV will turn Off and the TIMER
light will flash quickly for about one minute. When the TIMER light stops flashing, you may turn on the TV again.
Changes you made the last time the TV was On before you used the SYSTEM RESET button may be lost, however,
the changes you made previously are not lost.
POWER/TIMER Indicator
The green light is a multi-function indicator. This light will flash rapidly for about one minute each time the TV is
plugged into the wall electrical outlet, when power is restored after a power failure, or using the SYSTEM RESET
button. Do not attempt to turn on the TV again during this period. Wait for the flashing to stop and the light to
turn off, before attempting to turn the TV on. While the TV is powered on, the light illuminates steadily. If the TV
has been programmed to turn on automatically using the Timer feature, this light will flash slowly when the TV is
powered off.
A/V RESET Procedure
There may be times when you wish to reset the A/V (Audio and Video) settings back to the factory defaults. To do
this for an individual setting, use the Audio or Video remote control button. To return all of the settings at once,
press GUIDE and FORMAT on the front panel at the same time, or use the A/V Memory Reset selection on the
AudioVideo menu (page 68).
INPUT 3
This input can be used for convenient connection of a camcorder or other video device to the TV. If you connect to
the S-VIDEO terminal, the VIDEO terminal is deactivated. The VIDEO terminal is available when there is no S-Video
connection.
IEEE 1394
This IEEE 1394 (FireWire®) input/output allows for temporary connection of IEEE 1394 devices such as MPEG 2
camcorders or compatible hard disc drives to the front of the TV. This connection works the same way as the two rear
IEEE 1394 connections.
Except for SYSTEM RESET and TIMER, all of the buttons on the Front Control Panel (highlighted in gray) are
duplicated on the remote control. The top row of labels show the control functions when there are no TV menus
displayed on the screen. The bottom row of labels show the control functions when the TV menus are displayed on
the screen or when a special function has been activated. See Remote Control Overview page 29, for further details
on the functions of these buttons. TIMER is also accessible through the menu screens. Pressing MENU on the front
panel will display the TV menu.
DEVICE
CANCELMENUENTER
MENUFORMAT
CH
VOL
POWER
SYSTEM
RESET
TIMER
ADJUST
ADJUST
Front Panel WS-55517, WS-65517, WS-73517
GUIDE
INPUT-3
S-VIDEO VIDEO L-AUDIO-R
IEEE 1394
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WS55517 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WS55517 in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info