Manual Mitsubishi WL7200U (page 57 of 68) (English)

493650

Zoom out

Zoom in

1/68

EN-57

You can replace the lens on this projector. The lens

can be replaced with the separately sold option lens

according to the usage environment of the projector.

For details of the speciﬁcation of the option lens,

contact your local dealer.

• Beforeyoureplacethelens,besuretoturnoffthe

projector and unplug the power cord from the wall

outlet.

• Beforeyoureplacethelens,besuretoresetthe

lens position to the center (the factory default

position).

When the lens position is moved from the center,

reset to the center position (the factory default

position) using the lens shift reset (see page 33).

The lens replacement may fail when the lens

position is moved from the center.

• Theprojectorandlensarecomposedofprecision

parts. Do not subject them to shock or excessive

force.

• Duringreplacement,donottouchthelenssurface

with your hands.

• Takesufcientcarenottoattachanydirtoroil

on the lens surface, and not to scratch the lens

surface.

• Donotreplacethelensinadustyplace.Dirtor

dust entering the projector causes a degradation of

an image quality.

• Donotleavethelensremovedfromtheprojector

for a long period of time. Dirt or dust entering the

projector causes a degradation of an image quality.

• Donottouchthesignalcontactofthelenswith

your ﬁnger. When dirt or dust adheres, it may cause

a contact failure.

Removing the lens

1. Remove the lens ring by turning it counterclockwise

slightly.

Lens ring

2. Turn the lens counterclockwise until it stops while

pressing the lens release button on the top of the

cabinet as far as it will go, and then remove the

lens by pulling it out slowly.

•Donotdropthelenswhenremovingit.

Lens release button

Lens

Mounting the lens (option lens)

1. Remove the lens protective cap from the lens.

Lens

Protective cap

• Don’tattachtheprotectivecaptothelensafter

mounting the lens to the projector.

2. Insert the lens slowly as far as it will go with the red

mark on the lens pointed upward in the center.

Red mark

3. Turn the lens clockwise slowly until you hear it

click.

• Donotpressthelensreleasebuttonwhen

mounting the lens.

• Afteryoumountthelens,turnitcounterclockwise

and check that it isn’t removed.

4. Mount the lens ring by turning it clockwise.

Lens ring

Important:

• Donottransporttheprojectorwiththeoptionlens

mounted. The projector may be damaged.

• Withtheoptionlensmounted,thebrightness,

resolution, and color uniformity in the projected

image may differ from those with the standard lens.

• Withtheoptionlensmounted,theadjustableangle

in the keystone adjustment differs from that with

the standard lens.

• Inthekeystoneadjustmentwiththeoptionlens

mounted, the proper aspect ratio may not be

obtained.

• Whentheoptionlensismounted,projectedimages

may become distorted, have decreased resolution,

or have shadows at their corners if the projection

screen is set close to the top or bottom edge or

right or left edge of the effective projection area.

Replacing the lens

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WL7200U in the language / languages: English as an attachment in your email.

The manual is 13,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi WL7200U

Mitsubishi WL7200U Additional guide - English - 32 pages

Mitsubishi WL7200U User Manual - English - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi WL7200U Manual

Product: