216162
25
Zoom out
Zoom in
Previous page
1/47
Next page
EN-25
3. FEATURE menu
FEATURE
AUTO
AUTO
opt.
MENU POSITION
VIDEO SIGNAL
?
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OK
SCART INPUT
DISPLAY
INPUT
PASSWORD
FUNCTION
CINEMA MODE
AUTO
1.
SETUP
AUTO
OFF
ITEM SETTING FUNCTION
ASPECT AUTO Select to change the aspect ratio automatically depending on the input
signal. (Select this option for normal use.)
16:9
This option allows you to select the display position of squeezed (or
horizontally compressed) images stored on DVD discs. By pressing the
ENTER button, you can select the display position among CENTER,
UPPER, and LOWER.
REAL Select to project images in their original size as input.
FULL
Select to project images in full size (1280 x 800 pixels) irrespective
of type of input signal.
PASSWORD FUNCTION Use to enable or cancel the password lock. See page 33 for details.
MENU POSITION 2 options Use to change the position of the menu.
CINEMA MODE AUTO The fi lm mode will be automatically activated when a fi lm source signal is
input.
OFF The lm mode will not be activated.
VIDEO SIGNAL 8 options When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn’t displayed
correctly, select the desired video format manually.
SETUP AUTO Select to change the SETUP mode automatically.
OFF Select to make black lighter.
3.75% / 7.5% Select to make black thicker.
When 7.5% is chosen, the brightness is decreased by the set-up can-
cel function for the U.S. Choose OFF when the image is dark.
SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped with
the SCART terminal that can output RGB signal. SCART terminal is used
mainly in Europe. Choose OFF normally. (Available only for the input signal
from the COMPUTER/COMPONENT VIDEO IN-1 terminal.)
LANGUAGE 10 languages Use to select the language used in the menus.
RESET ALL OK
Use to reset the settings of the menu (excluding IMAGE CAPTURE,
PASSWORD FUNCTION and LANGUAGE) to the factory setting values.
CINEMA MODE can be adjusted only when a TV60, TV50, 480i or 576i signal is being displayed.
When SCART INPUT is set to ON, nothing is output to the external monitor.
When SCART INPUT is set to ON, normal computer signals arent projected.
Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped
with the SCART terminal.
Some AV devices equipped with the SCART terminal arent compatible with this projector.
Menu operation (continued)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi wl2650u at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi wl2650u in the language / languages: English as an attachment in your email.

The manual is 8,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info