475290
20
Zoom out
Zoom in
Previous page
1/140
Next page
20
21
AV
Receiver
Device to be
connected
stereo and/or digital
audio cables
video and stereo
audio cables
TV monitor output, stereo and
digital audio cables
Connecting External Devices & NetCommand
®
Setup
NetCommand is able to control many current audio and video devices by sending remote control signals from the TV
to each device. NetCommand is also able to learn the remote control signals used by most audio video devices not
already in the TV’s memory. NetCommand will also automatically switch the TV and compatible or learned Audio/Video
(A/V) Receivers to the correct input used with each device. It is important that the inputs on the TV and A/V Receiver
match the NetCommand Setup.
To simplify the installation of NetCommand, there is a step-by-step on-screen NetCommand Setup procedure. This
procedure details the type and brands of devices you are connecting to the TV. The NetCommand Setup also assigns
preset TV and A/V Receiver inputs for each device. You should connect each device to the TV input (both audio and
video) and to the A/V Receiver (audio) as shown in the figure below.
Mitsubishi 1 Mitsubishi 2 Bose Denon Integra Kenwood Marantz Pioneer 1 Pioneer 2 Rotel Sony Yamaha 1 Yamaha 2
Model
M-VR800 &
M-VR1000
Model
M-VR900 &
M-VR700
Model
Lifestyle
®
28
Model
AVR-2700
Model
DTR-9.1
Model
VR-2080
Model
SR8200
Model
VSX-D557
Model
VSX-49TX
Model
RSX-1065
Model
STR-DE825
Model
RV-X2095
Model
RX-V2200
Device Audio Output to AV Receiver Inputs by Name
VCR
VCR 1 VCR VCR VCR-1 Video 1 Video 1 VCR1
VCR/Tape
VCR 1/DVR Video 2 Video 1 VCR 1 VCR 1
Satellite Receiver Aux
Cable/DBS AUX CD Video 3 Video 3 DSS CD SAT Video 4 TV/DBS TV/DBS D-TV/LD
DVD Player
DVD DVD (built-in) DVDVDP DVD Video 4 DVD LD/SAT DVD/LD Video 5 TAPE/MD CD DVD
TV Monitor Output
(& Digital Audio)
TV TV TV TV/DBS Video 4 Video 4 TV DVD/TV TV Video 1 DVD/LD DVD/LD CBL/SAT
Device Audio and Video Ouputs to TV Inputs
Device TV Input
Antenna/cable (analog) Ant-A
Antenna/cable (digital) Ant-DTV
Cable Box Ant-B
VCR Input-1
Satellite Receiver (DBS) Input-2
Camcorder Input-5
DVD Player Component-1
NetCommand setup details are explained in book 2. After the initial NetCommand Setup, you may go to Edit
NetCommand at any time to change the inputs you used for connecting each device, custom name devices, add
devices not included in the presets above or delete devices no longer used. You may also want to review Connecting:
Helpful Hints, page 38 of this book, for frequently asked quetions about NetCommand connections.
Device Audio and Video Outputs to TV Inputs
Antenna/Cable (analog) Ant-A
Antenna/Cable (digital) Ant-DTV
Cable box Ant-B
VCR Input-1
Satellite Receiver (DBS) Input-2
Camcorder Input-3
DVD Player Component-1
The following charts show which preset inputs you should use on the TV and A/V Receiver. Chart 1 shows TV inputs.
Chart 2 shows the A/V Receiver inputs used by A/V Receiver models already known by NetCommand.
Chart 1.
Chart 2.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WL-82913 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WL-82913 in the language / languages: English as an attachment in your email.

The manual is 10,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info