475290
17
Zoom out
Zoom in
Previous page
1/140
Next page
16
17





  
       
         
 
      
       
        
         
    
          
       
Back Panel
1. Antenna (ANT-A, LOOP OUT, and ANT-B)
ANT-A and ANT-B receive analog NTSC signals from VHF/
UHF antennas or an analog NTSC cable system. LOOP
OUT sends the ANT-A signal out to another component,
such as a cable box or VCR.
2. IR Emitter-Repeater
Two jacks are provided for connecting IR emitters.
Connecting IR infrared emitters here allows the TV to pass
IR commands from most IR remote controls to other A/V
devices that are out of range of the remote control.
3. IR Output-NetCommand
®
Two jacks are provided for connecting IR emitters. IR
Emitters connected to these jacks are used by the
NetCommand system of the TV to control external analog
devices such as VCRs, DVDs, cable boxes satellite
receivers and audio receivers.
4. Digital Audio Output
This output provides Dolby Digital audio, received in the
signal from the ANT-DTV input and IEEE-1394 devices.
This output is intended to be connected to an external
audio receiver that is capable of decoding the digital
stream and converting it to analog signals suitable for
driving loudspeakers. This output does not send a signal
while analog devices connected to other inputs are being
use, when MP3 or WMA cards are being played, or when
MPEG audio signals are being received. These audio
signals are decoded by the TV internally and are output as
analog left and right audio to TV speakers by the Monitor
Output.
5. Antenna DTV (ANT-DTV)
This input receives digital TV signals from a VHF/UHF
antenna or unscrambled digital cable system. If the TV
receives scrambled cable signals on this input, it will
not be able to decode them. In this case, your cable
company must provide a decoding box.
6. M-LINK (MonitorLink) /DVI-HD
MonitorLink when used with MonitorLink Control is a
Mitsubishi exclusive proprietary digital interface for
the display of high quality digital video signals from a
Mitsubishi HD Receiver/Controller, such as the HD-5000.
The MonitorLink input can also be used as a DVI input
from other sources. The left and right audio allow the
external Mitsubishi HDTV Receiver/Controller or DVI
set-top box to provide audio to the TV to be able to use
the TV speakers. When MonitorLink is used as DVI, it is
HDCP compatible.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WL-82913 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WL-82913 in the language / languages: English as an attachment in your email.

The manual is 10,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info