549862
50
Zoom out
Zoom in
Previous page
1/79
Next page
EN-50
7. Select an item you want to set by pressing the or
button.
• Selectthecoloryouwanttoadjustusing
COLOR.
8. Select a setting value by pressing the or
button.
• Youcanenternumbersbypressingthenumber
buttons (0 to 9) while holding down the NUM
button on the remote control.
Repeat steps 7 to 8, if necessary.
Important:
• Thecolortonemaynotbedisplayedcorrectly
depending on the setting value. Set the value within
the proper range.
Set the target values of the brightness and
chromaticity coordinates:
4. Select MEASURE by pressing the or button.
MEASURED DATA
MEASURE
5. Select TARGET DATA by pressing the or
button.
6. Press the ENTER button.
MEASURE – TARGET DATA
COLOR
GAIN
x
y
RED
*
.
***
*
.
***
*
.
***
AUTO PATTERN
ON
7. Select an item you want to set by pressing the or
button.
• Selectthecoloryouwanttoadjustusing
COLOR.
• WhenyousetAUTOPATTERNtoON,thetest
pattern of each color is displayed.
8. Select a setting value by pressing the or
button.
• Youcanenternumbersbypressingthenumber
buttons (0 to 9) while holding down the NUM
button on the remote control.
Repeat steps 7 to 8, if necessary.
Important:
• The color tone may not be displayed correctly
depending on the setting value. Set the value within
the proper range.
Resetting the settings
• YoucanresettheSETTING,MANUAL,and
MEASURE settings to the factory defaults.
1. Display the MULTI-SCREEN menu.
2. Select SETTING, MANUAL or MEASURE by
pressing the or button.
3. Select RESET by pressing the or button.
4. Press the ENTER button.
Adjusting projected images (continued)
Adjusting the color variations
You can adjust the variations in the colors of the
images displayed on multiple projectors using the
menu settings.
(See page 31 for menu setting.)
Adjustment while viewing the screen
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the or
button.
OFF
COLOR MATCHING
3. Select MANUAL by pressing the or button.
4. Select MANUAL by pressing the or button.
MANUAL
SETTING
5. Select SETTING by pressing the or button.
6. Press the ENTER button.
MANUAL – SETTING
COLOR
GAIN
SATURATION
HUE
RED
0
0
0
WHITE R
WHITE G
WHITE B
- - -
AUTO PATTERN
ON
- - -
- - -
7. Select an item you want to set by pressing the or
button.
• Selectthecoloryouwanttoadjustusing
COLOR.
• WhenyousetAUTOPATTERNtoON,thetest
pattern of each color is displayed.
8. Select a setting value by pressing the or
button.
Repeat steps 7 to 8, if necessary.
Adjustment using a chroma meter
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the or
button.
OFF
COLOR MATCHING
3. Select MEASURE by pressing the or button.
Set the measured brightness and the chromaticity
coordinates:
4. Select MEASURE by pressing the or button.
MEASURED DATA
MEASURE
5. Select MEASURED DATA by pressing the or
button.
6. Press the ENTER button.
MEASURE – MEASURED DATA
COLOR
Y (RELATIVE)
x
y
RED
*****
*
.
***
*
.
***
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD8700U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD8700U in the language / languages: English as an attachment in your email.

The manual is 11,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi WD8700U

Mitsubishi WD8700U Additional guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info