549862
37
Zoom out
Zoom in
Previous page
1/79
Next page
EN-37
FEATURE menu
FEATURE
ADVANCED MENU
SETUP
SCART INPUT
AUTO
AUTO
OFF
STANDARD
OFF
2
2
VIDEO SIGNAL
LAMP WARNING
HIDE OSD
LAMP 1 TIME RESET
OK
LAMP 2 TIME RESET
OK
FILTER TIME RESET
OK
1
1
opt.
LANGUAGE
ADVANCED MENU
FEATURE
PROJECTOR ID
A
AUTO
English
GROUP ID
ALL
DISPLAY INPUT
ENTER
CINEMA MODE
PASSWORD FUNCTION
MENU POSITION
1
1
2
2
opt.
A
Ë
RESET ALL
OK
1.
ITEM SETTING FUNCTION
PROJECTOR ID ALL Select this option to control the projector regardless of the ID
number. (See page 62.)
01 to 63 Use to set the ID number (two-digit number). (See page 62.)
GROUP ID A to Z Use to set the ID number for controlling multiple projectors by
groups for monitoring and control via the SERIAL terminal. (See
page 62.)
PASSWORD FUNCTION DISPLAY INPUT
/
MENU ACCESS
/
SPLASH ID SCREEN
Use to enable or cancel the password lock. See page 58 for details.
MENU POSITION
1 (upper left) / 2 (lower right) /
3 (center)
Use to change the position of the menu.
CINEMA MODE AUTO The film mode will be automatically activated when a film source
signal is input.
Select AUTO for normal use.
When flicker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select
either FILM or VIDEO, which improves the symptom better.
FILM Fixed to the film mode.
VIDEO The film mode will not be activated.
LANGUAGE
/ English / Español /
Deutsch / Français / Italiano /
/ / /
PORTUGUÊS / SVENSKA /
POLSKI / Nederlands/ Norsk /
/ Türkçe /
ภาษาไทย
/ Bahasa Indonesia / Melayu /
Use to select the language used in the menus.
ADVANCED MENU ENTER The ADVANCED MENU is displayed for the following settings.
VIDEO SIGNAL AUTO / NTSC / PAL / SECAM
/ 4.43NTSC / PAL-M / PAL-N /
PAL-60
When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the image
isn’t displayed correctly, select the desired video format manually.
SETUP AUTO Select to change the SETUP mode automatically.
OFF Select to make black lighter.
3.75%/7.5% Select to make black thicker.
• When7.5%ischosen,thebrightnessisdecreasedbytheset-
up cancel function for the U.S. Choose OFF when the image is
dark.
SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped
with the SCART terminal that can output RGB signal. SCART
terminal is used mainly in Europe. Choose OFF normally. (Available
only for the input signal from the COMPUTER/COMPONENT VIDEO
IN-1 terminal.)
LAMP WARNING
STANDARD
When the lamp operating time exceeds 3000 hours with LAMP
MODE set to LOW, a warning dialog is displayed.
SHORT TERM
When the lamp operating time exceeds 3800 hours with LAMP
MODE set to LOW, a warning dialog is displayed.
HIDE OSD
OFF
Select this option for normal use.
ON
The no-signal dialog, input dialog, SCART warning dialog, auto
power-off dialog, lamp warning dialog, and abnormal temperature
dialog aren’t displayed.
Menu operation (continued)
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD8700U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD8700U in the language / languages: English as an attachment in your email.

The manual is 11,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi WD8700U

Mitsubishi WD8700U Additional guide - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info