493633
30
Zoom out
Zoom in
Previous page
1/44
Next page
EN-30
Network settings (continued)
Setting or Clearing DHCP
1. Display the IP CONFIG menu.
2. Press the S or T button to select DHCP.
3. Press the ENTER button.
Confirmation dialog appears.
4. Press the W or X button to select ON or OFF .
5. Select the item to set, and press the ENTER button.
To cancel the setting, press the MENU button.
It may take some time to reflect the settings.
When setting DHCP to ON, IP ADDRESS, SUBNET MASK,
and DEFAULT GATEWAY cannot be set. If you set those set-
tings, set DHCP to OFF and perform the IP settings as the
following procedures.
IP Address Settings
1. Display the IP CONFIG menu.
2. Press the S or T button to select IP ADDRESS.
3. Press the W or X button to select SET .
4. Press the ENTER button.
IP ADDRESS screen appears.
5. Press the direction buttons to move the key cursor, select the
numbers to enter, and press the ENTER button.
Set the numeric value within the range from 0 to 255. How-
ever, set the numeric value for the final octet within the range
from 1 to 254.
key: Shifting the position of enter cursor to the left.
key: Shifting the position of enter cursor to the right.
DEL key:Deleting the character in the position of enter cur-
sor for each character.
6. When selecting OK, the setting is completed as the IP
ADDRESS stored. However, when selecting CANCEL, the set-
ting is completed without storing.
The display returns the IP CONFIG menu after selecting OK
or CANCEL.
If the entered content is not correct, IP ADDRESS screen
appears again after an error dialog is displayed.
It may take some time to reflect the settings.
Subnet Mask Settings
1. Display the IP CONFIG menu.
2. Press the S or T button to select SUBNET MASK.
3. Press the W or X button to select SET .
4. Press the ENTER button.
SUBNET MASK screen appears.
5. Enter the Subnet Mask.
Refer to IP Address Settings for the detail of entering.
6. When selecting OK, the setting is completed as the Subnet
Mask stored. However, when selecting CANCEL, the setting is
completed without storing.
The display returns the IP CONFIG menu after selecting OK
or CANCEL.
If the entered content is not correct, SUBNET MASK screen
appears again after an error dialog is displayed.
It may take some time to reflect the settings.
Default Gateway Settings
1. Display the IP CONFIG menu.
2. Press the S or T button to select DEFAULT GATEWAY.
3. Press the W or X button to select SET .
4. Press the ENTER button.
DEFAULT GATEWAY screen appears.
5. Enter the Default Gateway.
Refer to IP Address Settings for the detail of entering.
6. When selecting OK, the setting is completed as the Default
Gateway stored. However, when selecting CANCEL, the setting
is completed without storing.
The display returns the IP CONFIG menu after selecting OK
or CANCEL.
If the entered content is not correct, DEFAULT GATEWAY
screen appears again after an error dialog is displayed.
It may take some time to reflect the settings.
Setting or Clearing PJLink Certification
Perform the settings to start PJLink protocol communication.
See page 34 for the detail of PJLink.
1. Display the NETWORK menu. (See page 22 for menu setting.)
2. Press the S or T button to select PJLink CERTIFICATION.
3. Press the ENTER button.
Confirmation dialog appears.
4. Press the W or X button to select ON or OFF .
5. Select the item to set, and press the ENTER button.
To cancel the setting, press the MENU button.
It may take some time to reflect the settings.
Initialization of Network Settings
1. Display the NETWORK menu. (See page 22 for menu setting.)
2. Press the S or T button to select NETWORK RESET.
3. Press the ENTER button.
Confirmation dialog appears.
4. If pressing the ENTER button again, the Network Settings can
be initialized.
It may take some time to reflect the settings.
DHCP
ON
IP ADDRESS
SET
SUBNET MASK
SET
DEFAULT
GATEWAY
SET
PJLink
CERTIFICATION
ON
NETWORK RESET
OK
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD620U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD620U in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info