493633
25
Zoom out
Zoom in
Previous page
1/44
Next page
EN-25
ENGLISH
Menu operation (continued)
4. SINGAL menu
Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.
When you change the value of the horizontal or vertical position drastically, noise may appear.
The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value
is changed. These conditions are not a malfunction.
SHUTTER does not work correctly during keystone adjustment.
When you increase the value of OVER SCAN, noise may appear on the screen.
Important:
You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.
5. NETWORK menu
Menu option Setting Feature description
SIGNAL USER menu
HORIZ. POSITION 0-999 Select this setting to adjust the horizontal position of projected images.
VERT. POSITION 0-999 Select this setting to adjust the vertical position of projected images.
FINE SYNC. 0-31
Select this setting to eliminate flickering or blurs, if they appear, when
you are viewing projected images.
TRACKING 0-2800
Select this setting to eliminate vertical wide stripes, if they appear, when
you are viewing projected images.
COMPUTER INPUT
AUTO Automatically sets the appropriate setting.
RGB
Select this setting when you connect the projector to high definition
video equipment having R, G, and B output terminals.
YC
B
C
R
/YP
B
P
R
Select this setting when you connect the projector to a DVD player or
other device having Y, C
B
, and C
R
(or Y, P
B
, and P
R
) component video
output terminals.
OVER SCAN 100%-90% Use this setting to adjust the display area of projected images.
HOLD OFF / ON
Use this setting to adjust projected images when flagging occurs in the
upper area of the screen.
USER OK
CLAMP POSITION 1-255
Use this setting to correct solid white or solid black that appears in pro-
jected images.
CLAMP WIDTH 1-63 Use this setting to correct solid black that appears in projected images.
VERT.SYNC AUTO / OFF
Use this setting to adjust projected images when the motion is not
smooth. Select AUTO for most cases.
LPF ON / OFF Select this setting to enable or disable LPF.
SHUTTER(U) 0-20
Use this setting to adjust projected images when noise appears in the
top part of the image.
SHUTTER(L) 0-20
Use this setting to adjust projected images when noise appears in the
bottom part of the image.
SHUTTER(LS) 0-20
Use this setting to adjust projected images when noise appears in the
left half of the image.
SHUTTER(RS) 0-20
Use this setting to adjust projected images when noise appears in the
right half of the image.
Menu option Setting Feature description
NETWORK IP CONFIG
menu
PROJECTOR NAME
*****
...
Displays PROJECTOR NAME. Displays PROJECTOR NAME in
blank when PROJECTOR NAME is not set.
SET
Set PROJECTOR NAME. Enter up to 15 characters (alphabets or
numeric characters).
NETWORK PASSWORD OK Set the password for Web control or PJLink certification.
IP CONFIG OK Select this setting for IP Configuration.
DHCP ON / OFF
Use this setting when you obtain IP CONFIG automatically by
DHCP server.
IP ADDRESS
***,***,***,***
Displays IP ADDRESS. However, IP ADDRESS is not set as factory
default, and cannot be displayed.
SET
Set IP ADDRESS. When DHCP is set to ON, you cannot change
this setting.
SUBNET MASK
***,***,***,***
Displays SUBNET MASK. However, SUBNET MASK is not set as
factory default, and cannot be displayed.
SET
Set SUBNET MASK. When DHCP is set to ON, you cannot change
this setting.
DEFAULT GATEWAY
***,***,***,***
Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is
not set as factory default, and cannot be displayed.
SET
Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot
change this setting.
MAC ADDRESS xx-xx-xx-xx-xx-xx Displays MAC ADDRESS.
PJLink CERTIFICATION ON / OFF Use this setting for PJLink Certification.
NETWORK RESET OK Resets the Network Setting.
USER
OK
OFF
HOLD
100%
OVER SCAN
SIGNAL
R G B
R G B
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
opt.
SIGNAL
USER
CLAMP
POSITION
1
CLAMP WIDTH 1
LPF OFF
SHUTTER(U)
VERT. SYNC. AUTO
0
?
SHUTTER(L)
0
SHUTTER(LS)
0
SHUTTER(RS)
0
opt.
opt.
NETWORK
PROJECTOR
NAME
NETWORK
PASSWORD
PJLink
CERTIFICATION
OK
SET
NETWORK RESET
OK
IP CONFIG
OK
ON
opt.
NETWORK
IP CONFIG
DHCP
IP ADDRESS
DEFAULT
GATEWAY
MAC ADDRESS
SUBNET MASK
xx-xx-xx-xx-xx-xx
192.168.0.10
255.255.255.0
10.132.1.1
ON
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD620U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD620U in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info