32977
32
Zoom out
Zoom in
Previous page
1/80
Next page
32 Chapter 3. TV Operation
Choosing a Program Source
(Device Selection Menu)
Figure 1
Press DEVICE on the TVs remote control to open the
Device Selection menu (Figure 1). The Device Selec-
tion menu allows you to select an input for viewing. The
device or input currently displayed on the TV appears as a
gold-colored icon.
To assign meaningful labels to the icons, such as
“VCR” or “DVD,” see the “Input Name” section of
chapter 4, “TV Menu Operations.
To rearrange the icons, see the “Icon Order” section
of chapter 4, “TV Menu Operations.
Device
Section
Figure 1. Device Selection Menu
Device Section
To select another device or input, press ADJUST
on the TV’s remote to move the highlight. Press ENTER
to select the device to view and hear. The TV inputs are
automatically changed.
Video Section
The destination of the device highlighted in the Device
Section is displayed here as a TV icon.
IMPORTANT
Leave the TV powered off for a while each day
for the TV to receive ChannelView updates. The
updates may take from five to 15 minutes to
complete, depending on the number of channels
in memory. Program listings will be temporarily
lost if the TV loses power.
ChannelView Channel Listings
Figures 2 and 3
Press GUIDE while viewing ANT 1 to display a list of avail-
able memorized digital (D) and analog (A) channel infor-
mation (if available from the broadcaster).
ChannelView for digital channels shows the major channel
and sub-channels (or bitstreams). Analog channel infor-
mation is displayed as sent. Press ADJUST or to
scan through all the channels in memory one by one. To
cycle through the choices quickly, press CH or .
For detailed program information for digital channels, press
ADJUST ; to return to basic information, press ADJUST
. This information is sent by the broadcaster. If limited
data is shown or no program data appears, it is because
the broadcaster is not sending the information. This is not
a defect of your TV.
Figure 2. ChannelView screen, current programs. Use
ADJUST to move between the displays for current
and future programs.
Figure 3. ChannelView screen, future programs on the
selected channel (digital channels only)
GUIDE and Devices
For satellite receivers and some cable boxes, when the
remote has been programmed for the device, GUIDE dis-
plays the on-screen programming guide for the receiver
or cable box. Press ADJUST and ENTER to
navigate the displayed Guide.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD52526 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD52526 in the language / languages: English as an attachment in your email.

The manual is 7,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info