475307

Mitsubishi WD-Y57aa Manual

42
Zoom out
Zoom in
Previous page
1/124
Next page
42 Chapter 3. TV Setup
3. IntheAutoInputsensingscreen(seefigure8),high-
lighttheLearnbuttonandpress
ENTER
toopenthe
Learnscreenforthedevice(seefigure9).
NetCommand
“Learn” button
Name you select
for the device
Figure 8. Highlight the Auto Input Sensing screen’s Learn
button and press ENTER to open the NetCommand Learn
screen.
Figure 9. In the NetCommand Learn screen, you tell the
TV to remember key commands to send to another device
via an IR emitter.
4. ThefirstfunctionhighlightedintheLearnscreenis
alwaysPower (On).AimtheTV’sremotecontrolat
theTVandpress
ENTER
tobeginlearningforthatfunc-
tion.
5. WhenthePower (On)textstartsflashing,aimthe
device’sremotecontrolattheTVandpressandhold
the
POWER
keyuntilacheckmarkappearsinthebox.
Ifthetextstopsflashingbeforethecheckmark
appears,repeatthisstep.
6. Ifthedevicehasaseparate
POWER OFF
key,press to
highlightthecheckboxforPower Off.Repeatthe
precedingstepto“learn”the
POWER OFF
key.
If device has no
POWER OFF
key, skip this step.
By completing “learning” for the power keys, the TV’s
remote control now operates the power function for
the device when you set it as the current viewing
device in the Input Selection menu. Point the remote
control at the TV to control the device.
Initial NetCommand® Setup
What You Need to Know About NetCommand
• NetCommandsetupisoptional.
• NetCommandoperatesbysendingsignalsfromthe
TVtoyourotherdevicesviatheIRemitters,tellingthe
devicestoplay,record,changeinputs,adjustvolume,
changechannelsandmanymorefunctions.Allthis
isaccomplishedwiththeTV’sremotecontrolandthe
slideswitchleftinthe
TV
position.
• TheIR“Learning”featureofNetCommandallowsthe
TVtolearntheremotecontrolsignalsforyourA/V
devices.
• NetCommand®cancontrolIEEE1394devicesby
sendingcontrolsignalsoveraFireWire®cable.
• YoucanchoosethelevelofNetCommandcontrolfor
yourhometheater.
Limited Setup. Performalimitedsetupifyou:
WantNetCommandtocontrolonlyafew
devices,suchastheTV,aplaybackdevice
(likeaDVDplayer),andacablebox.Withthis
setup,youcanusetheTV’sremotecontrolto
operatethesedevices.
WanttouseTVGuideOnScreen®tocontrol
yourcableboxandVCRand/orA/Vdisc.
Afterperformingthissetup,youcanusethe
TV’sremotecontroltooperatethesedevices.
WanttheeaseandflexibilityofNetCommand-
controlledrecording,withseamlesssetupof
time-delayedorimmediaterecordingsamong
networkeddevices.
Full Setup. Performafullsetupifyouwantto
giveNetCommandthefollowingadditonalcontrol:
ControlasurroundsoundA/Vreceiver.
Automaticallychangeinputselectionsforthe
A/Vreceiver.
Initial NetCommand Setup for Most Device
Types
• TosetupanA/Vreceiver,see“AdditionalSetupUsing
theNetCommandMenu”laterinthischapter.
• Forsetuplater,ortomakechangestothesetup,see
“AdditionalSetupUsingtheNetCommandMenu”later
inthischapter.
1. ConnectandpositiontheIRemittersasdescribedin
chapter2,“TVConnections.”
2. HavetheremotecontrolsfortheTVandtheother
devicereadybeforebeginning.SettheTVremote
control’sslideswitchtothe
TV
position.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-Y57aa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-Y57aa in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info