475255
96
Zoom out
Zoom in
Previous page
1/110
Next page
96 Appendices
For assistance call 1(800) 332-2119
Appendix E: Troubleshooting, continued
Sound
Symptom Remarks
1. There is no sound even when the
volume is turned up.
• Checkifthe
MUTE
key is on.
• TheTV’sanalog
Listen to
setting may be set to SAP (analog
program from the ANT input) but no SAP is being broadcast.
• CheckthattheSound > Audio > TV Speakers option is set to
On
to hear sound from the TV speakers. Possibly the
TV Speakers
option is
Off
or set to
Center
but there is no A/V receiver con-
nected.
• IfusinganA/Vreceiver,checkthattheSound > Audio > TV
Speakers option is set to
Off
to hear sound from the A/V receiver
speakers.
•
Press and hold the
POWER
button on the control panel for 10
seconds to perform System Reset.
The language selected in the Setup > Antenna Digital Audio
menu is not being broadcast for the current program.
2. The sound does not match the screen
picture.
The TV’s analog
Listen to
setting
may be set to SAP
(analog program
from the ANT input)
.
3. The sound from my A/V receiver does
not match the screen picture (I should
hear the correct audio from my A/V
receiver).
• Check that
DIGITAL AUDIO OUTPUT
and/or
AUDIO/SURROUND
OUTPUT
on TVs connection panel is connected to the A/V
receiver.
Without this connection, devices connected only to the TV (and
not the A/V receiver) can be heard only from the TV speakers.
Note that this includes the
ANT
input, a device (such as a
camcorder) connected to the TV, and any other device sending
audio to the TV only.
• If using a NetCommand-controlled A/V receiver, NetCommand
may be selecting the wrong A/V receiver audio input. Check the
A/V receiver’s NetCommand setup in the Inputs > AVR menu.
4. Cannot select an audio-only device; it
does not appear in the Input Selection
menu.
Plug an unused video plug into the
Y/VIDEO
jack to activate Auto
Input Sensing. Assign the name CD/Audio or MP3 to make the
audio device selectable in the Input Selection menu.
5.. Sound is coming from the TV speakers
instead of the A/V receiver.
• Connect the TV’s
AUDIO OUT
to the A/V receiver.
• Change TV Speakers setting to Off or Center.
7. A color program appears as a black and
white image, or the colors are dim, or the
screen is black.
• If using component video, check that the red, green, and
blue input cables are correctly connected to the red, green,
and blue component video jacks.
• If using composite video, check that the incoming cable is
connected the TV’s green
Y/VIDEO
jack.
• 838 Series. The PerfectColor color balance has been incor-
rectly set. Reset the PerfectColor balance.
8. Picture from an HDMI input is noisy (poor
quality).
• Compare the picture to the TVs test picture (Picture >
Picture+ > Test Picture) to check if the noise is internal or
external to the TV.
• Upgrade a Category 1 (unmarked) HDMI cable to a newer
type of high-speed HDMI cable.
9. The image from a computer appears dis-
torted when viewed on the TV.
• Normal TV operation. The TV does not correct distortion in
the picture from a computer because the correction process
may cut off the edges of the image.
• The aspect ratio may be wrong for the image. Press
FORMAT
to change.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-82838 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-82838 in the language / languages: English as an attachment in your email.

The manual is 7,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info