475255
33
Zoom out
Zoom in
Previous page
1/110
Next page
3. TV Features 33
For assistance call 1(800) 332-2119
3D Video
Important
This page describes enhanced 3D options offered
with TV software versions 012.06 and later.
Instructions for earlier software are on page 33.
Enhanced 3D Video Options
(TV Software Versions 012.06 and later)
To display 3D gaming or 3D cinema content, your
Mitsubishi TV requires:
• A compatible 3D source device outputting a 3D
signal in one of these formats:
- Frame Packing 1080p/24 Hz or 720p/60 Hz
- Top-Bottom 1080p/24Hz or 720p/60 Hz
- Side-by-Side format, 1080p, 24/30/60 Hz; 720p,
60 Hz
- Checkerboard format, 1080p, 60-Hz; (lower
resolutions may be supported but will not fill the
screen)
• Active-shutter 3D glasses, DLP link type or IR
emitter type with matching emitter
Which Software Version Is in My TV?
Press
MENU
to see your TVs software version dis-
played in the lower left corner of the main menu.
Versions 012.06 and later carry enhanced 3D video
options.
Initial Setup
1.
If your 3D glasses came with an emitter box,
connect the emitter box to the
3D GLASSES
EMITTER
jack. Place the box in front of the TV
where there is a clear path to the glasses.
Note: If your glasses are marked DLP Link, skip this
step; no emitter box is required with DLP Link
technology.
1
2
3
HDMI
AUDIO
OUTPUT
Pb Pr
INPUT 2
INPUT 1
DIGITAL
AUDIO
OUTPUT
DVI/PC
(480i / 480p / 720p / 1080i)
LR INPUT
AUDIO
Y/ VIDEO
Pb Pr
Y/ VIDEO
3D
GLASSES
EMITTER
ANT
AUDIO
LR
LR
AUDIO/SURROUND
OUTPUT
LR
IR-NetCommand
Output/EXTERNAL
CONTROLLER INPUT
CENTER
INPUT
SUB
WOOFER
OUTPUT
LAN
++
+
1
2
3
HDMI
AUDIO
OUTPUT
Pb Pr
INPUT 2
INPUT 1
DIGITAL
AUDIO
OUTPUT
DVI/PC
(480i / 480p / 720p / 1080i)
LR INPUT
AUDIO
Y/ VIDEO
Pb Pr
Y/ VIDEO
3D
GLASSES
EMITTER
ANT
AUDIO
LR
LR
AUDIO/SURROUND
OUTPUT
LR
IR-NetCommand
Output/EXTERNAL
CONTROLLER INPUT
CENTER
INPUT
SUB
WOOFER
OUTPUT
LAN
++
+
TV back panel
2.
Power on the TV and the source device.
3.
Connect the source device to the TV’s HDMI input.
4.
When the New Device Found screen displays,
name the input.
5.
Press
EXIT
to close the New Device Found screen.
Menu showing enhanced 3D options
Automatic
• When the TV detects a 3D signal from an
HDMI 1.4a-compliant device, it switches
automatically to 3D mode and selects the
correct 3D format.
• When receiving a normal 2D signal, the TV
automatically exits 3D mode.
Off
• Turns off 3D images.
• Restores normal TV operation when viewing a
normal 2D signal.
Choice of Source Formats
If your device is non-HDMI 1.4a compliant,
you must choose the correct setting from
this list.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-82838 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-82838 in the language / languages: English as an attachment in your email.

The manual is 7,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info