475266
30
Zoom out
Zoom in
Previous page
1/40
Next page
30 Appendices
For assistance call 1(800) 332-2119
Reset Name When to Use How to Use Resulting Action
Format If the picture shape
seems incorrect, use
the
FORMAT
key to
change the picture
shape.
Press
FORMAT
to cycle through the
available picture shapes for the
signal.
The last-used format for a signal
type will be recalled on the input.
Note: Also check the aspect ratio
feature on your cable box, satellite
receiver, or other device, as this may
be altering the picture.
Picture and
Sound Resets
(for the single
current input)
When audio and/
or video settings for
a single input seem
incorrect, use the reset
option to return the
input to the original
factory settings.
While viewing the input to reset, 1.
press
MENU
and go to Picture >
Reset or Sound > Reset.
Press 2.
ENTER
to reset.
All picture or sound settings for
the individual input are reset.
Channel Scan To erase and re-mem-
orize channels on the
antenna input. Use
after moving the TV to
a new area or reposi-
tioning the antenna.
Press 1.
MENU
and go to Channels
> Antenna Source.
Highlight the reception mode, 2.
either Cable or Air, and press
ENTER
.
Go to 3. Channels > Scan Channels
and start the channel scan. Be
sure Additive Scan is set to OFF.
All previously memorized chan-
nels for the antenna input are
erased and a new set of memo-
rized channels is created.
Locks Menu
PIN
To change your Locks
menu PIN
When prompted for the PIN, press
the number
9
and
LAST
keys on the
TV remote control at the same time.
To use number keys only, press
6 4 8 7
.
Allows establishment of a new
PIN.
TV Locks To temporarily disable
channel or ratings
locks.
Allows you to view a locked
channel or program. Turn the TV
off and then on to restore locks.
TV Re set Comparison Guide
You can resolve many common TV problems using the
reset functions described in the following table.
IMPORTANT
Before you change sound or picture settings: If
picture or sound settings seem wrong for a broadcast
channel (a channel from the
ANT
input, a cable box,
or satellite receiver), first check other channels from
the same input before changing settings. If most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.
Appendix B: Troubleshooting
Service and Customer Support
Service
If you are unable to correct a problem with your TV,
consult your Mitsubishi dealer or Mitsubishi Consumer
Relations at (800) 332-2119.
DO NOT adjust any controls other than those
described in this Owner’s Guide.
DO NOT remove the protective back cover of your
TV.
Customer Support
To order replacement or additional remote controls
or lamp cart
ridges,
visit our website at www.mitsu-
parts.com or call (800) 553-7278.
• For questions:
Call Consumer Relations at 800-332-2119.
E-mail: MDEAservice@mdea.com
Website: www.mitsubishi-tv.com
Important
All lamps replaced under warranty must be returned to
Mitsubishi where they will be inspected to verify failure
defects.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73C10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73C10 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info