475257
41
Zoom out
Zoom in
Previous page
1/110
Next page
3. TV Features 41
For assistance call 1(800) 332-2119
This setup is unnecessary if using the TV speakers
as a center channel. See page 27.
Sound Projector Technology
838 Series. The TVs built-in speaker array can be
adjusted to reflect sound off the room walls to create a
surround sound effect. Setup can be performed either
manually or automatically.
• To create the surround sound effect, the room walls
must reflect sound and not be covered with sound-
absorbent material.
• Repeat the setup procedure if you reconfigure the
room’s walls or furnishings.
Before You Begin
Positioning the TV
• Center the seating area in front of the TV and at
least six feet away from it.
• Arrangements that give good results:
• If the room is an odd shape, locate the TV to take
best advantage of wall reflections.
• Avoid locations that may distort sound reflections.
Connecting the TV
To hear digital surround sound, the TV must be con-
nected to a digital surround sound source. The TV can
receive digital surround sound from:
• Any HDMI jack
• The
ANT
input (from some digital broadcasts)
Other stereo connections will provide Dolby Pro Logic
surround sound.
Sound Projector (838 Series)
Basic Manual Setup
Note: If you have already performed Auto setup, do
not make manual adjustments. Doing so will
erase all settings created during Auto setup.
1.
Press
MENU
and go to Sound > SoundPro.
2.
Enter the room dimensions and layout information
requested in the screen. To change measure-
ments, press .
3.
Press
EXIT
to exit and save settings.
4.
Play some sample audio to check sound quality.
If further adjustment is needed, use the Custom
menu as described next.
Custom Menu
Use the Custom menu after defining the room layout.
For a room with large areas of curtains that might affect
sound reflection, do the following:
a. Open the curtains fully to improve sound reflec-
tion.
b. Set angles by performing the procedure in
Adjusting Beam Angles.”
c. Close the curtains.
d. Set levels by performing the procedure in
Adjusting Levels.”
1.
From the Sound > SoundPro menu go to the
CUSTOM menu.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73838 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73838 in the language / languages: English as an attachment in your email.

The manual is 7,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info